Lfx2-ma fast ethernet extender installation guide.
Lfx2-ma fast ethernet extender the lantronix lfx2-ma fast ethernet extender is a 10/100 bridge that can be used in a number of ways in an ethernet environment: 1. Conversion between 10 mbps ethernet and 100 mbps fast ethernet - allows devices of one speed to be connected to a segment supporting the ...
3 installation tips note: these tips are additional to the installation instructions that can be found on the back of the unit. ▼ the rj45 ports on the lfx2-ma are autosensing for speed and for half/full duplex operation. When the unit is powered on, verify the correct modes of operation by examinin...
4 cable requirements the lantronix lfx2-ma is compatible with utp (unshielded twisted pair) and stp (shielded twisted pair) cables. Eia category 3,4 or 5 cables can be supported on the rj45 connectors. All ports of the lfx2-ma are configured as mdi-x ports; port 2 has an mdi option for connecting to...
5 technical support if problems occur during product operation, please check the lfx2-ma switch settings, cables, connectors, network terminators, hardware compatibility and other network components first. Prior to contacting lantronix technical support, please have the following information availab...
Declaration of conformity (according to iso/iec guide 22 and en 45014) manufacturer’s name: lantronix manufacturer’s address: 15353 barranca parkway irvine, ca 92618 usa declares, that the product: product name: ethernet extender model number(s): lfx2-ma conforms to the following standards: safety: ...
I mportant instructions for lms and lfx installation ▼ design connections to avoid loops - these unmanaged switches do not support spanning tree algorithm ▼ if using dedicated switch ports for a connection to a single server, single user or another switch, use full duplex if possible for much better...
