Lantronix SUN-PC Product Manual - page 5
Trading Floor Switch
SUN-PC
Lightwave Communications, a Lantronix Company
5
PN 15.00.020 - 0102B
(
Sun Trader
unit shown above)
3.
Connect your keyboard to the Trading Floor Switch keyboard (K) port. If using
the PS/2 version, connect the Mouse to the Trading Floor Switch. The SUN
Mouse connects to the SUN keyboard as usual.
4.
Using the provided Category 5 cable (or another fully-pinned Cat 5 cable up
to 45 feet in length), connect the Remote Switch to the main body. The 3M
Dual Lock may be placed on the remote and its mounting location if desired.
The fastener has adhesive already applied with a peel-off backing, so no
additional adhesive should be necessary. Dual Lock does not function like a
conventional hook-and-loop fastener; any Dual Lock surface will mate with
any other Dual Lock surface.
5.
Turn on the power to the CPU’s. The Trading Floor Switch will power up with
the first CPU. As long as any connected CPU remains powered on, the
Switch will continue to operate.
The Trading Floor Switch may now be used normally as outlined in section 3.0.
2.3 Use with Lightwave ServerSwitch Systems
To connect a PC ServerSwitch Plus or a ServerSwitch 8200 to the Trading Floor Switch,
attach the
USER
port of the ServerSwitch to the appropriate port on the Trading Floor
Switch as outlined above. A PC ServerSwitch Plus should be connected to one of the
port pairs marked “PC 1” or “PC 2”, while a ServerSwitch 8200 should be connected to
one of the ports marked “SUN 1” or “SUN 2”. It is not necessary to remove power from a
ServerSwitch when attaching the keyboard and mouse cables to the Trading Floor
Switch.