Lantronix UBOX 2100 Quick Start Manual - page 5
6
W W W . L A N T R O N I X . C O M
Q u i c k S t a r t G u i d e
U B o x 2 1 0 0 / 4 1 0 0
7
CONNECTING THE USB DEVICE
1. Connect your USB device to any USB port on the Lantronix UBox.
Above each USB port is a green LED light. This light indicates whether your USB
device is supported in the current software/firmware. A solid green light
indicates that your device is supported. A slowly blinking light indicates that
your USB device is not currently supported. Please contact Lantronix if you
have a slowly blinking light.
USB Ports
➞
➞
CONNECTING THE USB DEVICE CONTINUED
2. On the Start menu, click Programs
➞Lantronix UBox USB Device
Server
➞UBox USB Device Server.The USB Devices tab of the Lantronix
UBox USB Device Server window opens. Your networked USB device displays
in the Device Name column.
Notes:
• If you do not see your USB device, please read the detailed troubleshooting
instructions in the User Guide.
• If you have installed a software or hardware firewall, you may need to configure
it to allow access to your UBox. Please refer to the User Guide for details.
USB Device
attached to
the UBox
➞