Lantronix xDirect-IAP Quick Start Manual
xDirect
™
-IAP Quick Start Guide
1 HARDWARE REvIEW
2
HARDWARE InSTALLATIOn
1. Connect a serial device to the xDirect-IAP device server.
2. Connect an Ethernet cable to the RJ45 port.
3. For the standard xDirect-IAP (non-PoE) version, supply power to your
unit using the power supply that was included in the packaging.
4. For the xDirect-IAP PoE version, power is supplied to your unit over
an Ethernet interface using an 802.3af PoE compliant power source
such as a PoE mid-span or PoE Ethernet switch.
THIS COMPLETES THE HARDWARE INSTALLATION.
Power Port
(mini USB connector)
3.5
" (88.9 mm)
xDirect-IAP Device Server
Quick Start Guide
Power Supply*
5vDC with International adapters
* not included with xDirect-IAP PoE version
WHAT’S In THE BOX
xDIRECT-IAP PINOUTS
RJ45 ETHERNET
xDirect
™
-IAP Quick Start Guide
1 HARDWARE REvIEW
2
HARDWARE InSTALLATIOn
1. Connect a serial device to the xDirect.
2. Connect an Ethernet cable to the RJ45 port.
3. For the standard xDirect-IAP (non-PoE) version, supply power to your
unit using the power supply that was included in the packaging.
4. For the xDirect-IAP PoE version, power is supplied to your unit over
an Ethernet interface using an 802.3af PoE compliant power source
such as a PoE mid-span or PoE Ethernet switch.
THIS COMPLETES THE HARDWARE INSTALLATION.
Power Port
(mini USB connector)
3.5
" (88.9 mm)
xDirect Device Server
Quick Start Guide
Power Supply*
5vDC with International adapters
* not included with xDirect-IAP PoE version
WHAT’S In THE BOX
xDIRECT-IAP PINOUTS
RJ45 ETHERNET
xDirect™-IAP Quick Start Guide
1 HARDWARE REvIEW
2
HARDWARE InSTALLATIOn
1. Connect a serial device to the xDirect.
2. Connect an Ethernet cable to the RJ45 port.
3. For the standard xDirect-IAP (non-PoE) version, supply power to your
unit using the power supply that was included in the packaging.
4. For the xDirect-IAP PoE version, power is supplied to your unit over
an Ethernet interface using an 802.3af PoE compliant power source
such as a PoE mid-span or PoE Ethernet switch.
THIS COMPLETES THE HARDWARE INSTALLATION.
Power Port
(mini USB connector)
3.5
" (88.9 mm)
xDirect Device Server
Quick Start Guide
Power Supply*
5vDC with International adapters
* not included with xDirect-IAP PoE version
WHAT’S In THE BOX
xDIRECT-IAP PINOUTS
RJ45 ETHERNET
xDirect™ Quick Start Guide
1 HARDWARE REvIEW
2
HARDWARE InSTALLATIOn
1. Connect a serial device to the xDirect.
2. Connect an Ethernet cable to the RJ45 port.
3. For standard xDirect units, supply power to your unit using the power
supply that was included in the packaging.
4. For the xDirectPoE version, power is supplied to your unit over an
Ethernet interface using an 802.3af PoE compliant power source such
as a PoE mid-span or PoE Ethernet switch.
THIS COMPLETES THE HARDWARE INSTALLATION.
Power Port
(mini USB connector)
3.5
" (88.9 mm)
Depending on the xDirect™ model, the following pinouts apply
xDirect Device Server
Quick Start Guide
Power Supply*
5vDC with International adapters
* not included with xDirectPoE version
WHAT’S In THE BOX
xDIRECT PINOUTS
RJ45 ETHERNET
Link LED
Activity LED
Contact 8
Contact 1
DB9F in RS232 Mode
(All models)
DB9F in RS422/485 (4-Wire) Mode
(xDirect485 & PoE Models)
DB9F in RS485 (2-Wire) Mode
(xDirect485 & PoE Models)
RJ45
Link LED
Activity LED
Reset Switch -
on bottom
Serial TX
LED
Serial Port DB9
Female (DCE)
Serial RX
LED
Power / Status
LED
GND
DTR
(in)
5-15
VDC
(in)
CTS
(out)
RTS
(in)
DSR
(out)
TX
(in)
RX
(out)
DCD
(out)
5
9
1
6
GND
TX+ RX-
RX+ TX-
5
9
1
6
GND
TX/
RX+
TX/RX-
5
9
1
6
5-15
VDC
(in)
5-15
VDC
(in)
Link LED
Activity LED
Contact 8
Contact 1
DB9F in RS232 Mode
DB9F in RS422/485 (4-Wire) Mode
DB9F in RS485 (2-Wire) Mode
RJ45
Link LED
Activity LED
Reset Switch -
on bottom
Serial TX
LED
Serial Port DB9
Female (DCE)
Serial RX
LED
Power / Status
LED
GND
DTR
(in)
5-15
VDC
(in)
CTS
(out)
RTS
(in)
DSR
(out)
TX
(in)
RX
(out)
DCD
(out)
5
9
1
6
GND
TX+ RX-
RX+ TX-
5
9
1
6
GND
TX/
RX+
TX/RX-
5
9
1
6
5-15
VDC
(in)
5-15
VDC
(in)
Link LED
Activity LED
Contact 8
Contact 1
DB9F in RS232 Mode
DB9F in RS422/485 (4-Wire) Mode
DB9F in RS485 (2-Wire) Mode
RJ45
Link LED
Activity LED
Reset Switch -
on bottom
Serial TX
LED
Serial Port DB9
Female (DCE)
Serial RX
LED
Power / Status
LED
GND
DTR
(in)
5-15
VDC
(in)
CTS
(out)
RTS
(in)
DSR
(out)
TX
(in)
RX
(out)
DCD
(out)
5
9
1
6
GND
TX+ RX-
RX+ TX-
5
9
1
6
GND
TX/
RX+
TX/RX-
5
9
1
6
5-15
VDC
(in)
5-15
VDC
(in)
Link LED
Activity LED
Contact 8
Contact 1
DB9F in RS232 Mode
DB9F in RS422/485 (4-Wire) Mode
DB9F in RS485 (2-Wire) Mode
RJ45
Link LED
Activity LED
Reset Switch -
on bottom
Serial TX
LED
Serial Port DB9
Female (DCE)
Serial RX
LED
Power / Status
LED
GND
DTR
(in)
5-15
VDC
(in)
CTS
(out)
RTS
(in)
DSR
(out)
TX
(in)
RX
(out)
DCD
(out)
5
9
1
6
GND
TX+ RX-
RX+ TX-
5
9
1
6
GND
TX/
RX+
TX/RX-
5
9
1
6
5-15
VDC
(in)
5-15
VDC
(in)