1. DL manuals
  2. Lantronix
  3. Gateway
  4. xPico 900-619
  5. Integration Manual

Lantronix xPico 900-619 Integration Manual

Manual is about: serial to ethernet simple gateway module

Summary of xPico 900-619

  • Page 1

    Part number 900-619 revision l september 2017 xpico embedded device server integration guide.

  • Page 2: Intellectual Property

    Xpico® embedded device server integration guide 2 intellectual property © 2017 lantronix, inc. All rights reserved. No part of the contents of this publication may be transmitted or reproduced in any form or by any means without the written permission of lantronix. Lantronix, xpico and dstni are reg...

  • Page 3

    Xpico® embedded device server integration guide 3 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an exp...

  • Page 4: Warranty

    Xpico® embedded device server integration guide 4 note: with the purchase of any xpico family product, the oem agrees to an oem firmware license agreement that grants the oem a non-exclusive, royalty-free firmware license to use and distribute the binary firmware image provided, only to the extent n...

  • Page 5: Table Of Contents

    Xpico® embedded device server integration guide 5 table of contents intellectual property __________________________________________________ 2 contacts ___________________________________________________________ 2 disclaimer __________________________________________________________ 2 warranty _____...

  • Page 6: List Of Figures

    Xpico® embedded device server integration guide 6 list of figures figure 2-1 xpico and xpico wi-fi dimensions and views ____________________ 12 figure 2-2 xpico block diagram _______________________________________ 13 figure 2-3 xpico wi-fi block diagram ___________________________________ 14 figure...

  • Page 7: List Of Tables

    Xpico® embedded device server integration guide 7 list of tables table 1-1 xpico and xpico wi-fi features _________________________________ 8 table 2-1 xpico part numbers _________________________________________ 10 table 2-2 xpico and xpico wi-fi pin connections _________________________ 15 table 2...

  • Page 8: 1.  Introduction

    Xpico® embedded device server integration guide 8 1. Introduction about the integration guide this user guide provides the information needed to integrate the lantronix® xpico® embedded device servers into customer-printed circuit boards. This manual is intended for engineers responsible for integra...

  • Page 9: Additional Documentation

    1: introduction xpico® embedded device server integration guide 9 additional documentation visit the lantronix web site at www.Lantronix.Com/support/documentation for the latest documentation and the following additional documentation. Document description xpico wi-fi smt embedded device server user...

  • Page 10

    Xpico® embedded device server integration guide 10 2. Functional description designed for quick integration with minimal engineering effort, the chip-sized xpico embedded device server provides simplicity and flexibility making it the easiest and fastest networking-enabling module on the market. Xpi...

  • Page 11: Xpico Features

    2: functional description xpico® embedded device server integration guide 11 xpico features the xpico device server contains lantronix’s own dstni® ex controller, with 256 kbytes of sram, 16 kbytes of boot rom, and integrated 10/100 phy. The xpico embedded device server also contains the following: ...

  • Page 12

    2: functional description xpico® embedded device server integration guide 12 figure 2-1 xpico and xpico wi-fi dimensions and views xpico unit xpico wi-fi unit.

  • Page 13: Xpico Block Diagram

    2: functional description xpico® embedded device server integration guide 13 - xpico block diagram the following drawing is a block diagram of the xpico embedded device server showing the relationships of the components. Figure 2-2 xpico block diagram.

  • Page 14: Xpico Wi-Fi Block Diagram

    2: functional description xpico® embedded device server integration guide 14 xpico wi-fi block diagram the following drawing is a block diagram of the xpico wi-fi embedded device server showing the relationships of the components. Figure 2-3 xpico wi-fi block diagram dc power 3.3v 8 mb serial flash ...

  • Page 15: Pcb Interface

    2: functional description xpico® embedded device server integration guide 15 pcb interface the xpico embedded device servers has a serial interface compatible with data rates up to 921,600 bps (in high-performance mode). The serial signals (rx, tx, rts, cts, and all cps) are 3.3v cmos logic level an...

  • Page 16

    2: functional description xpico® embedded device server integration guide 16 table 2-3 xpico (wired) pcb interface signals signal name xpico pin # primary function reset state internal pull-up driver strength gnd 1 signal ground gnd 2 signal ground cp8 3 configurable i/o input active 56k to 122k 4ma...

  • Page 17

    2: functional description xpico® embedded device server integration guide 17 signal name xpico pin # primary function reset state internal pull-up driver strength cp7 27 configurable i/o input active 56k to 122k 4ma cp3 28 configurable i/o input active 56k to 122k 4ma 3v3 29 3.3v input power cp4 30 ...

  • Page 18

    2: functional description xpico® embedded device server integration guide 18 signal name xpico pin # primary function reset state internal pull-up /pull- down driver strength floating nc 11 no connect nc 12 no connect nc 13 no connect wkup 4 14 system wake up on rising edge input, floating 30k to 50...

  • Page 19: Mating Connector

    2: functional description xpico® embedded device server integration guide 19 signal name xpico pin # primary function reset state internal pull-up /pull- down driver strength default settings. Gnd 37 signal ground ext_reset# 38 unit hardware reset, active low. Drive low to reboot unit. Input 30k to ...

  • Page 20

    2: functional description xpico® embedded device server integration guide 20 antenna type peak gain typical lantronix part number vendor vendor part number pcb strip antenna with 50mm cable to u.Fl connector without tape backing 1.5 to 2.5dbi, 2.39 ghz to 2.49 ghz ethertronics 1000668 swivel type an...

  • Page 21

    2: functional description xpico® embedded device server integration guide 21 figure 2-6 reverse-sma to u.Fl(short) (lantronix part number 500-182-r) antenna placement (xpico wi-fi units only) when designing the xpico wi-fi module to a mating board, it is important to consider the final installation ...

  • Page 22

    2: functional description xpico® embedded device server integration guide 22 table 2-7 recommended magnetic modules and combo rj45/magnetic module connectors type manufacturer part number magnetic only (requires rj45) bi-tech hs91-011-80lftr magnetic only (requires rj45) mingtek hn0013sg combination...

  • Page 23: Serial Interface

    2: functional description xpico® embedded device server integration guide 23 figure 2-7 ethernet connection example (xpico wired unit only) serial interface the xpico and xpico wi-fi embedded device servers have two external serial interfaces. The signal levels on the serial interface are 3.3v logic...

  • Page 24

    2: functional description xpico® embedded device server integration guide 24 figure 2-8 serial port example table 2-9 rs232 connections (serial transceiver required) xpico signal dce connector dte connector signal (logic) description db9 db25 signal db9 db25 signal rxdx data in 2 3 rxdx 3 2 txdx txd...

  • Page 25

    2: functional description xpico® embedded device server integration guide 25 usb device port (xpico wi-fi units only) the xpico wi-fi embedded device server has one usb2.0 full speed device port interfaces for connection to an upstream usb device. The port consists of a differential pair, signals dd...

  • Page 26: Leds

    2: functional description xpico® embedded device server integration guide 26 leds the xpico embedded device server contains several external signals that are intended to drive external status leds. The leds are listed below. The signals may be connected as shown in the reference schematic figure bel...

  • Page 27: Reset Pins

    2: functional description xpico® embedded device server integration guide 27 reset pins the xpico and xpico wi-fi embedded device servers have two signals for use as reset signals. Signal ext_reset# is a hardware controlled input signal that will reboot the xpico processor when asserted low. Signal ...

  • Page 28

    2: functional description xpico® embedded device server integration guide 28 evaluation board schematics figure 2-10 evaluation board schematic, part 1 of 5.

  • Page 29

    2: functional description xpico® embedded device server integration guide 29 figure 2-11 evaluation board schematic, part 2 of 5.

  • Page 30

    2: functional description xpico® embedded device server integration guide 30 figure 2-12 evaluation board schematic, part 3 of 5.

  • Page 31

    2: functional description xpico® embedded device server integration guide 31 figure 2-13 evaluation board schematic, part 4 of 5.

  • Page 32

    2: functional description xpico® embedded device server integration guide 32 figure 2-14 evaluation board schematic, part 5 of 5.

  • Page 33

    3: mounting instructions and pcb footprint xpico® embedded device server integration guide 33 3. Mounting instructions and pcb footprint the xpicoembedded device server dimensions and mounting instructions are shown in the following drawings below. You may also directly access the cad files through ...

  • Page 34

    3: mounting instructions and pcb footprint xpico® embedded device server integration guide 34 to install the xpico or xpico wi-fi module in the xpico embedded device server development kit (part number xpc100100k-02) and xpico wi-fi development kit (xpw100100k-01), the xpico module comes installed t...

  • Page 35

    3: mounting instructions and pcb footprint xpico® embedded device server integration guide 35 figure 3-2 aligning mounting clip legs to standoff holes 6. Insert the white clip legs furthest from the j1 connector first and gently push down on the xpico module above the j1 connector. Keep the module a...

  • Page 36

    3: mounting instructions and pcb footprint xpico® embedded device server integration guide 36 figure 3-3 mounting instructions for pem standoff.

  • Page 37

    3: mounting instructions and pcb footprint xpico® embedded device server integration guide 37 figure 3-4 hirose connector layout.

  • Page 38: Product Information Label

    3: mounting instructions and pcb footprint xpico® embedded device server integration guide 38 product information label the product information label contains important information about your specific unit, such as its part number, revision, manufacturing date code, product model, country of origin,...

  • Page 39: 4.  Specifications

    4: specifications xpico® embedded device server integration guide 39 4. Specifications electrical specifications caution: stressing the device above the rating listed in this table may cause permanent damage to the xpico embedded device server. Exposure to absolute maximum rating conditions for exte...

  • Page 40

    4: specifications xpico® embedded device server integration guide 40 table 4-3 xpico wi-fi recommended operating conditions parameter symbol min typical max units supply voltage v cc 3.15 3.3 3.46 vdc supply voltage ripples v cc_pp 2 % tx power @ 16.5dbm, 802.11b, 11mbps i cc 330 380 ma tx power @ 1...

  • Page 41: Technical Specifications

    4: specifications xpico® embedded device server integration guide 41 technical specifications table 4-4 xpico wired technical specification category description cpu, memory lantronix dstni-ex 186 cpu, 256-kbyte zero wait state sram, 512- kbyte flash, 16-kbyte boot rom firmware upgradeable via tftp a...

  • Page 42

    4: specifications xpico® embedded device server integration guide 42 table 4-5 xpico wi-fi technical specification category description cpu, memory cortex m3 cpu, 1mb flash, 128kb+4kb sram, additional 1mb on board flash firmware upgradeable via tftp and serial port wlan standards 802.11 b/g/n wirele...

  • Page 43

    4: specifications xpico® embedded device server integration guide 43 category description management internal web server, snmp (read only) serial login, telnet login security password protection, locking features, optional rijndael 256-bit encryption internal web server serves static web pages and j...

  • Page 44

    Xpico® embedded device server integration guide 44 a: compliance (xpico embedded device server) (according to iso/iec guide 22 and en 45014) manufacturer’s name & address: lantronix, inc. 7535 irvine center drive, suite 100, irvine, ca 92618 usa declares that the following product: product name mode...

  • Page 45

    Xpico® embedded device server integration guide 45 figure a-1 certificate of compliance for halogen free manufacturer’s contact: lantronix, inc. 7535 irvine center drive suite 100 irvine, ca 92618 usa tel: (800) 526-8766 tel: (949) 453-3990 fax: (949) 453-3995.

  • Page 46: Server)

    Xpico® embedded device server integration guide 46 b: compliance (xpico wi-fi embedded device server) xpico wi-fi and xpico wi-fi smt compliance information can be found in the xpico wi-fi embedded device server user guide . Visit the lantronix web site at https://www.Lantronix.Com/support/documenta...