Part number 900-509 revision a may 2007 xpress-pro sw 52000 user guide.
Xpress-pro sw 52000 user guide 3 copyright & trademark © 2005, lantronix. All rights reserved. No part of the contents of this book may be transmitted or reproduced in any form or by any means without the written permission of lantronix. Printed in the united states of america. Ethernet is a tradema...
Xpress-pro sw 52000 user guide 4 contents 1: preface 5 plug-and-play solution _______________________________________________ 5 2: product overview 6 hardened compact switch ____________________________________________ 6 package contents ___________________________________________________ 6 product ...
Xpress-pro sw 52000 user guide 5 1: preface a member of the growing family of rugged switches, this switch addresses a need for a smaller switch. This switch provides an affordable solution for rugged and outdoor environment, transportation road-side cabinet, industrial floor shop, multitenant dwell...
Xpress-pro sw 52000 user guide 6 2: product overview hardened compact switch package contents when you unpack the product package, you shall find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to your authorized reseller. This switch ...
2: product overview xpress-pro sw 52000 user guide 7 product highlights basic features 5-port 10/100base-tx or 4-port 10/100base-tx plus 1-port 100base-fx. Available in media converter format with 1-port 10/100base-tx and 1-port 100base-fx. Support ieee802.3/802.3u/802.3x. Auto-negotiation: 10/100mb...
2: product overview xpress-pro sw 52000 user guide 8 c power status (pwr) this led comes on when the switch is properly connected to power and turned on. D port status leds the leds display status for each respective port. Led state indication 10/100tx or 100fx steady a valid network connection es...
Xpress-pro sw 52000 user guide 9 3: installation this chapter gives step-by-step instructions about how to install the switch: selecting a site for the switch as with any electric device, you should place the switch where it will not be subjected to extreme temperatures, humidity, or electromagnetic...
3: installation xpress-pro sw 52000 user guide 10 connecting to power dc terminal block power inputs 1. Connect the dc power cord to the plug-able terminal block on the switch, and then plug it into a standard dc outlet. 2. Disconnect the power cord if you want to shut down the switch. The terminal ...
3: installation xpress-pro sw 52000 user guide 11 connecting to your network cable type & length it is necessary to follow the cable specifications below when connecting the switch to your network. Use appropriate cables that meet your speed and cabling requirements. Speed connector port speed half/...
Xpress-pro sw 52000 user guide 12 a: specifications and standards table specification hardened compact switch 10/100baset/tx auto-negotiating ports with rj-45 connectors, 100basefx fiber ports applicable standards ieee 802.3 10baset ieee 802.3u 100basetx/fx switching method store-and-forward forward...
Xpress-pro sw 52000 user guide 13 pin arrangement of rj45 connectors: the following table lists the pinout of 10/100baset/tx ports. Pin regular ports uplink port 1 input receive data + output transmit data + 2 input receive data - output transmit data - 3 output transmit data + input receive data + ...