1. DL manuals
  2. Lanzar
  3. Crossover
  4. OPTIDRIVE OptiX-10
  5. User Manual

Lanzar OPTIDRIVE OptiX-10 User Manual

Manual is about: 10-Channel Active Electronic Crossover Network with Subwoofer Level Control

Summary of OPTIDRIVE OptiX-10

  • Page 1

    Www.Lanzar.Com 10-channel active electronic crossover network with subwoofer level control u s e r ’ s m a n u a l optix-10 optix-10

  • Page 2

    Congratulations on your purchase of a new lanzar opti signal processor. Opti mobile electronics are some of the most advanced car audio products available. These quality audio products are designed and engineered to afford you years of uncompromising musical service. Lanzar has utilized the latest e...

  • Page 3

    General features precautions features and specifications system wiring mounting and installation noise check and system adjustment troubleshooting 2 3 4-6 7-11 12-13 14 15 t a b l e o f c o n t e n t s.

  • Page 4

    10 crossover channels blue light illumination 4 channel inputs signal pass-through for additional processors remote bass level control high channels: separate front and rear frequency and gain controls mid channels: separate front and rear frequency and gain controls sub channels: frequency and gain...

  • Page 5

    3 p r e c a u t i o n s to prevent short circuits, be sure to disconnect the negative battery ground lead before wiring the system up. When you finish the installation, be sure to make one more check to be sure everything is done correctly. Reinstate all car parts that were removed. Reconnect the ne...

  • Page 6

    4 f e a t u r e s a n d s p e c i f i c a t i o n s.

  • Page 7

    5 f e a t u r e s a n d s p e c i f i c a t i o n s 1. F/r input switch 2. Front & rear channel mid cut q selectors 3. Front & rear channel mid cut controls 4. Front & rear channel high-pass phase inverters 5. Front frequency & gain controls 6. Rear frequency & gain controls 7. Subwoofer frequency &...

  • Page 8

    6 f e a t u r e s a n d s p e c i f i c a t i o n s crossover frequencies -front high-pass -front mid high-pass -front mid low-pass -rear high-pass -rear mid high-pass -rear mid low-pass crossover slope rate subwoofer boost boost frequency mid cut mid cut q: distortion frequency response signal-to-n...

  • Page 9

    7 s y s t e m w i r i n g 2-channel 3 way system rear channel speakers front channel speakers head unit (stereo, dvd player, tape deck, etc.) to rear output to sub output to remote output from head unit battery ground to line out of head unit to front output sub channel speakers.

  • Page 10

    8 s y s t e m w i r i n g 2-channel multiple crossover system to rear mid out to sub output head unit (ster eo, dvd player , t ape deck, etc.) subwoofer speakers rear mid-woofer speakers to front mid out to rear high out to front high out ground ba tter y to rear out of head unit to remote output fr...

  • Page 11

    9 to sub output tweeter speakers subwoofer speakers to front mid out to rear high out to front high out ground ba tter y mid-woofer speakers woofer speakers upper midrange speakers (to remote output fr om head unit).

  • Page 12

    10 s y s t e m w i r i n g battery to front high out 4 channel 4 way system to rear mid out to sub output to remote output from head unit ground subwoofer speakers front tweeter speakers rear mid-woofer speakers to rear high out to front & rear out of head unit rear tweeter speakers.

  • Page 13

    11 s y s t e m w i r i n g 6-channel 5-way system front tweeter speakers to rear mid out to sub output head unit (stereo, dvd player, tape deck, etc.) to remote output from head unit subwoofer speakers front tweeter speakers rear mid-woofer speakers to front mid out front mid-woofer speakers to rear...

  • Page 14

    12 m o u n t i n g a n d i n s t a l l a t i o n your new opti series crossover comes complete with all required mounting hardware. Please read the installation precautions section below before installing your lanzar opti signal processor, and then refer to the diagrams provided to connect power, au...

  • Page 15

    13 m o u n t i n g a n d i n s t a l l a t i o n • solder-less connectors or soldering gun with heat shrink tubing 1. Find a suitable location in the vehicle to mount the processor. The x-10 is a trunk mount unit and it should be installed in close proximity to your amplifier system on the amp rack....

  • Page 16

    Noise check check the entire audio system for noise before permanently securing the crossover mounting 1. Start the engine. 2. Turn the audio system on. 3. Rev the engine and vary the volume of the audio system to determine if there is any unwanted noise. If so, turn both the audio system and the en...

  • Page 17

    1. There is an audible distortion at a low volume level. Problem possible cause • output levels not set correctly. • crossover frequencies not set correctly. • check for shorts on the speaker leads. 2. A whining sound can be heard through the speakers when the audio system is at low volume with the ...

  • Page 18

    All lanzar signal processors are carefully constructed and thoroughly tested before shipment. Units purchased in the usa are warranted to be free of defects in material and workmanship for three (3) years from the date of purchase. This warranty is limited to the original retail purchaser of the sig...