- 1 - congratulations on your purchase of a lanzar crossover. This product has been designed and built to deliver excellent sound quality and long lasting high performance. We are sure you will enjoy listening to your favorite music with this lanzar component in your car audio system. For best resul...
- 2 - controls and operation 5. Left/right front channel signal inputs: to be connected to the front channel output of the source unit. 1.Power input terminal(12v): to be connected to the positive terminal of your vehicle battery or other constant +12v source. 2.Ground input terminal: to be wired to...
- 3 - 9. Front channel high-pass frequency selector: for selection of front channel high-pass crossover frequency between 32hz and 800hz (or 320hz and 8khz when its frequency multiplier is at x10 position). 10. Rear channel high-pass frequency selector: for selection of rear channel high-pass crosso...
- 4 - electrical & audio connections.
- 5 - electrical & audio connections.
- 6 - *wiring is not loose or cables misconnected/disconnected - ground is important *rca cables are not faulty trouble shooting symptom possible remedy: signal processor check: does not turn on. *remote turn-on wire has (+) 12v *(+) 12v wire has (+) 12v *ground wire is properly connected: level of ...
Www.Lanzar.Com.
