Lanzar SDANDR696 User Manual - page 6

FRONT PANEL AND BUTTONS

Tips:

 Navi----You might have several maps in this device, by pressing Navi button, you will enter into the map 

which you set as default in the Navi path, if you want to change the navi path to another map, please go to setting 

to change it.

Setting 

Car setting          Navi setting.

TURNING POWER ON

1. Turn on the engine key to the  “ACC” or “ON” position

2. Press and hold the power button for 3 seconds

    - When the engine key is turned to the off position the unit is turned off

      Status Bar (Along top of radio screen and app screen) you can swipe down for more.

5

Button & Feature Layout

Mic

Microphone port

POW

Hold to power up / shut down unit. Short press while unit is on to mute the volume output

MUT

Press the 'MUTE' Button once to mute audio output. Press it 'MUTE' again to restore audio output.

RST

Use a pin to insert into reset port to trigger unit reset. (Hold for 20 secs . to reset)

MODE

Switch between apps/radio interface, Press while in GPS interface to return to radio apps

VOL+

Volume up

VOL-

Volume down

GPS

Press to load GPS software from SD map card

Hold to open screen and eject disk.

IR

IR remote receiver port

Home

Time display

Screen shot

Bluetooth

Location

DVR

Wi i signal

Function set

Return

3G

Display On/O

ff

www.Lanzar.com