Summary of SNV90
Page 1
Owner’s manual mobile video system snv90 www.Lanzar.Com.
Page 2: Safety Instructions
Please read this section carefully and follow all the instructions given. This will help ensure reliable operation and extend the service life for your appliance. • keep the packaging and the user instructions for future reference or inquiries. 1) never open up the housing of the appliance, it conta...
Page 3: Safety Instructions
• arrange cables so that no-one can tread on them or trip over them. Do not place any items on the cable. • working with memory card this navigation system supports sd memory cards. 1) inserting memory cards: carefully take the memory card out of its packing (if included). Take care not to touch or ...
Page 4: Installation
4 installation • mounting the navigation set in a car use 4 screws ( 5x25) to install the navigation set to the car, please refer to the followed diagram..
Page 5: Accessories
5 accessories • gps box • gps antenna • remote sensor • sd card • screw 5x25 (4 pcs) • rgb to rgb cable • rgb to rca video lineout • remote control.
Page 6: Gps Box
1. Gps ant (gps antenna, to receive gps signal.) 2. Socket (connect gps box and the unit) 3. Rgb/video switch (switch between rgb mode and video mode.) 4. Reset (reset button) 5. Pwr (power indicator led) 6. Sd (sd card interface) 6 gps box 2 1 one side other side 6 3 4 5.
Page 7: Remote Control
7 remote control 1. Esc press it to exit the current menu. 2. (enter) press it to enter the selected item. 3. / , / these buttons serves as navigation-pad, moves up / down / left / right by pushing the corresponding area of the pad. 4. Vol+/- press vol+/- buttons to increase/decrease the sound. 5. Z...
Page 8: Electrical Connection
8 electrical connection wiring (1) wiring (2) exteral anttena gps box 20 pin gps box exteral anttena rgb out rca out (white) (red) (yellow) audio l out audio r out video out b+ (yellow) acc (red) ground (black) (optional) r (red) g (green) b (blue) sync (brown) (optional) (optional) external remote ...
Page 9: Operation
• console when all the connections is finished, turn the unit on, switch the mode to navigation mode, the unit will enter the following interface automatically. Note: if you have set “auto navigation when power on”, when you turn on the unit, it will skip console interface and enter navigation inter...
Page 10: Operation
6)tap to enter volume option menu. There are two method to adjust the volume: method a: when you select or , press ok button on remote control to adjust the system volume level. Method b: when you select , press / (left/right) buttons on remote control to adjust the volume up or down. Tap chock box ...
Page 11: Software Operation
1) when all the connections is finished, turn the unit on, switch the mode to navigation mode, the unit will enter the following interface automatically. Note: if you have set “auto navigation when power on”, when you turn on the unit, it will skip console interface and enter navigation interface au...
Page 12: Software Operation
When the installation is finished it will return to console interface automatically. 5) tap icon to enter setting menu, then tap in setting menu to enter navi option menu: tap to enter device menu: double tap nandflash folder to open it : double tap destinator folder to enter it and select dextinato...
Page 13
8800-0g9013-.