Lanzar VBD2400U Instruction Manual - page 8
Page 8
Page 7
Radio station search mode is divided by this LOC/DX switch, this button can
be used to control an attenuator in the tuner during search. The detecting level
of seek, scan, auto-memory will be reduced as much as the attenuated level
of the tuner. In radio mode, press the LOC button to change local reception or
distance reception. Note: This button is only for FM reception. In AM mode,
LOC is void.
Press the SCN button to scan the radio frequency. If a valid signal has detected,
the current frequency will be hold and blinked for 5 seconds, then press SCN
again to stop scan and remain the current frequency; otherwise, the radio will
go on to scan the other radio frequency five seconds later.
Press the CLK button briefly to display time for 5 seconds on the display, and
then returns to its previous display unless the button is pressed again.
Then press the CLK button and hold for more than 1 seconds until the real time
flashes on the display. Then you can adjust HOUR or MINUTE by rotating the
VOL knob.
In the power on state, the loaded disc can be ejected by pressing the EJ key.
When needing to play the file in the USB bar, turn over the plastic cover cap
then insert the USB bar into the USB socket. The system will change into the
USB mode automatically, and then play the first file in the USB.
When no needing to do USB operation, please cover the plastic cover cap.
When you need to play the file in the MMC/SD card, insert the MMC/SD card
into the MMC/SD card socket. The system will change into the MMC/SD mode
automatically, and then play the first file in the MMC/SD.
Note:
When MMC/SD card and USB bar are both inserted into their slot or socket,
the system will change into the playback mode of the latter one.
When the front control panel is removed this indicator flashes.
Before operating the unit for the first time, or after replacing the car battery or
changing the connections. You must reset the unit.
Press this button with a cuspidal object. This operation will erase the clock
setting and some stored contents.
20. LOC/DX BUTTON
21. SCAN Button
22. CLOCK BUTTON
23. EJECT KEY
24. CD SLOT
25. USB SOCKET
26. MMC/SD CARD SOCKET
27. FLASHING LED
28. RESET BUTTON
1. Power On/Off.
2. Mute Button
3.
4. Level/MENU UP Button
5. SEL/MENU
Loudness Button
Button
6. Level/MENU Down Button
7. MO/ST Button
8. A.P Button
9.Band Button
10. Mode Button
11.Tune/Seek Up And Track Skip Up/FF Button
12.Tune/Seek Down And Track Skip Down/REW Button
13. SCAN BUTTON
14. Clock Display /Setting Button
15. LOC/DX Button
16. CD Track TOP/>||/Radio Preset 1
17. CD Track INT/Radio Preset 2
18. CD Track RPT/Radio Preset 3
19. CD Track RDM/Radio Preset 4
20. Radio Preset 5
21. Radio Preset 6
OPERATION OF REMOTE CONTROL
4
6
8
14
16
18
20
7
11
15
19
21
1
5
3
13
12
10
9
17
2
6
4
5
1
3
2
POWER
MUTE
CLK
A.P
-
+
SEL
DN
UP
ST
LOC
LOUD
SCN
MO DE
BAND
TOP/
RPT
INT
RDM