LapSafe Traveller series User Manual - 3. Moving Your Traveller™
5
Copyright LapSafe® Products
The Traveller™ Charge & Sync Range - User Manual
3. Moving your Traveller™
Do not attempt to move the LapSafe® Traveller™ while it is connected to a mains
supply or a host laptop or pc.
Switch off the power to the Traveller™ at the wall, unplug and stow the mains
lead and the PC to USB link lead. Close the lid and make sure that the latches are
firmly snapped shut before moving the case.
Stand the Traveller™ upright onto the ‘wheel end’, release the catch to deploy the
pull-up handle and gently tip the case onto its wheels. The LapSafe® Traveller™
can now be moved to a new location
(Figure 2)
.
Take care not to bump your LapSafe® Traveller™ into furniture, doorframes or
other obstacles when moving it between locations. Should any part of the
LapSafe® Traveller™ become severely damaged it should be taken out of use for
repair / replacement. Please contact us if your LapSafe® Traveller™ gets badly
damaged and we will advise on the best method of repair.
To protect the content of you LapSafe® Traveller™ when it is necessary to move it
up or down stairs we recommend that it is carried between two people using the
handles on each end.
Figure 1
Serial plate
Figure 2
Pull-up handle