Lars & Ivan Bolero mini User Manual

Summary of Bolero mini

  • Page 1

    User manual.

  • Page 3

    2 introduction 3 before use 4 5 speaker placement 6 connections others contents 1.

  • Page 4

    2 congratulations! Thanks for purchasing the bolero mini speaker. We are sure that you will enjoy all kinds of music from our inspired quality product. Designed and engineered by well credited team of experts, lars&ivan products assure to provide the best our products provide top quality sound. D es...

  • Page 5

    1. Do not locate in the following places to ensure long-lasting use, do not locate the bolero mini speaker where: exposed to direct sunlight. Near to sources of heat such as heaters. Highly humid or poorly ventilated. Dusty. Subjected to mechanical vibrations. On wobbly, inclined or otherwise unstab...

  • Page 6

    4 power handling: 4 ohms, nominal 20 w rms, compatible to amp up to 40 w output. Frequency range ( ± 3 db): 110 hz ~ 20 khz. Sensitivity: 84 db spl (1 w @ 1 m). Driver units: one 70 mm mid-range / bass driver and 19 mm hight frequency soft dome tweeter. Dimensions (h x w x d ): 184 x 132 x 120 mm / ...

  • Page 7

    5 3 m proper placement of the speakers is an important step in obtaining the most realistic soundstage. These recommendations are for the optimal placement of the loudspeakers. Use these placement recommendations as a guide. Slight variations will not diminish your listening pleasure. The bolero min...

  • Page 8

    6 speaker connections speaker and electrical terminals have corresponding (+) and (-) terminals. It is important to connect both speakers identically: this section describes the care and maintenance tasks that must be performed to optimize the operation of your lars&ivan component. Cleaning of equip...

  • Page 10

    Www.Lars-ivan.Com.