Lars & Ivan THA-21 User Manual - Specification
SPECIFICATION
Output Power
140mW x 2 (16
Ω Load),
13mW x 2 (300
Ω Load)
Frequency Response
10Hz ~ 25KHz (with load <100
Ω)
Headphone Impedance
16
Ω ~ 300Ω
Signal to Noise Ratio
>95dB (A weight)
Stereo Separation
>50dB (1mW 16
Ω)
Weight
4100g
Size (LxWxH)
Amplifier: 214(L) x 155.5mm(W) x 82.5(H)
Transformer: 129(L) x 140.8mm(W) x 82.5(H)
- 4 -
Headphone impedance
You may have several headphone of different impedance. The
impedance commonly in the market is 16
Ω, 32 Ω and some may over
hundred. Our THA-21 caters for different headphone impedance to
provide best performance. You may select the impedance setting from
rear panel
; "L" for 16~30
Ω, "M" for 32~90 Ω and "H" for 100~300 Ω.
Cascade to following amplifier stage
If you wish to make use of the THA-21 Vacuum tube pre-amplifier stage
for your other amplifier. You may use THA-21 output
as tube
amplifier stage for following amplifier stage to your other instrument.