Larson Electronics NVR-POE-4CH Quick Start Manual

Summary of NVR-POE-4CH

  • Page 1

    1 item description video out (vga, hdmi) audio in / out rca connectors for audio line input and line output alarm in / out terminations are provided for 4 alarm inputs (n.O. Or n.C.) and 1 alarm output. See below. (if applicable) power connector nvr-poe-4ch: connect the 48 vdc power adapter provided...

  • Page 2

    2 www.Larsonelectronics.Com step 2. Hdd installation hdd comes preinstalled. Please contact larson electronics for replacement information. Step 3. Install the nvr for the following steps, refer to the back panel photo above for the location of connectors. 1. Place the nvr in a location that is secu...

  • Page 3

    3 www. .Com by default, the setup wizard will open automatically. Important notes for using the wizard: • password strong” administrator user password. Follow the on-screen note: there is no factory default password for this device. • date and time • storage - hdd with it in this window. If you inst...

  • Page 4

    4 www.Larsonelectronics.Com model nvr-poe-4ch nvr-poe-8ch ethernet 1x 10/100 mbps rj-45 self-adaptive ethernet interface, 4 independent 10 /100 mbps poe ethernet interfaces 1x gigabit rj-45 self-adaptive ethernet interface, 8 independent 10 /100 mbps poe ethernet interfaces power over ethernet max p...

  • Page 5

    5 www.Larsonelectronics.Com password reset 1. If they are not already connected, connect a monitor and a usb mouse to the nvr. Use the usb port at the back on the unit to connect the mouse. The device will not accept a keyboard; you will use an on-screen keyboard to enter information. 2. Power up th...