Larson Electronics RL-85-LED-36W-CPR Operating Instructions

I. Operating Instructions - RL-85-LED-36W-CPR

1

1. This rechargeable LED can be charged at 

any location using a vehicle or wall charger. The 

charger connects to the light at the base. The 

light can be powered on by pressing the on/off 

button located on the front of the handle.

2. The charger will have a solid red indicator 

light when the battery is charging.

3. Charge time will vary based on remaining 

battery charge and battery condition. Maximum 

charge time is 3 hours.

4. The spotlight can be turned on while the 

charger is plugged in however, the spotlight will 

not charge while the light is being operated.

5. This LED spotlight has a lithium-ion battery. 

The battery can be charged as little or as much 

as desired without “memory” issues. Lithium ion 

batteries do not need to be fully drained before 

charging nor fully charged before continuing 

usage.

6. The LED indicator will turn green when the 

battery is fully charged.

7. Lithium ion batteries generally will discharge 

very slowly while not being used. You can expect 

a fully charged lithium ion battery to last 9-12 

months on the shelf if the light was fully charged 

when stored.

WARNING: While the charger is intelligent enough to back off the charger when the battery is fully 

charged, it is not recommended that you leave the light on the charger indefinitely. Ultimately, the heat 

created by the charger and the battery will degrade the components. Leaving the battery to charge 

for a day will not cause damage however, leaving the battery to charge for multiple days or weeks 

continuously will degrade the life of the charger and the battery.

On/Off Push 

Button

Charging Port