LARSON EXPCMR-ALG-OZ-IC-1080P-1227 HD-TVI Quick Installation And User Manual
1
EXPCMR-ALG-OZ-IC-1080P-1227 HD-TVI
Motorized Auto-focus Infrared Bullet
Camera Quick Installation and User Guide
The EXPCMR-ALG-OZ-IC-1080P camera delivers 1080p high-definition video resolution over
RG59 coax or any standard analog CCTV cabling. It features a motorized 5 ~ 50 mm vari-focal
lens with auto-focus. These HD video camera is ideal for long range security applications that
require high detail, such as facial recognition or license plate identification.
Wiring Instructions
•
2 MP CMOS image sensor w 1080p video output
•
HD-TVI technology produces 1080p HD video for sharp, detailed images
•
5 ~ 50 mm motorized vari-focal lens with viewing angle of 59.8° ~ 6° and auto-focus
•
True day/night (ICR) captures sharp, clear images in low light and at night
•
OSD (On-Screen Display) controls for customizing the camera settings for the installation venue
•
-40 °F ~ 140 °F temperature operating range
•
IP66 weather-rated housing
EXPCMR-ALG-OZ-IC-1080P-1227 Camera
The EXPCMR-ALG-OZ-IC-1080P-1227 can utilize the included BNC to copper wire pair
convertors. By default the convertor is installed on the camera. When utilizing the convertors
be sure you are using a dedicated pair of wires that do not go through transfer or are wired
into line voltage of any kind.
Features
Connect the second adaptor that will hook into the DVR. Make sure to use the same colors for
positive and negative on both ends.
This unit must be installed by a licensed electrician in accordance to
NFPA 70 / NEC Code Book Article 500.
Connect a copper wire to the plus and negative receptacles on the convertor making note of
which color you use.
Mounting
The mounting bracket allows 90° vertical adjustment and 360° of swivel for precision aiming.
Mount the unit to a flat surface using the predrilled 3/8” mounting holes. Position the camera
loosely until connected to a monitor. Once connected, view the monitor and adjust the
position accordingly before securing it in place.
2 x 3/4" NPT hubs are available for running connections to and from the unit via conduit.
Larson Electronics LLC - 1.800.369.6671 - sales@larsonelectronics.com - larsonelectronics.com