Laser 5990 Instructions
www.lasertools.co.uk
5990
www.lasertools.co.uk
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T +44 (0) 1926 815000 F +44 (0) 1926 815888
info@toolconnection.co.uk
www.toolconnection.co.uk
If this product fails through faulty materials or workmanship, contact our
service department direct on: +44 (0) 1926 818186. Normal wear and tear
are excluded as are consumable items and abuse.
Guarantee
Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability
is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be
held responsible for any damage to personnel, property or equipment when using the tools. Incorrect use will also
invalidate the warranty.
If applicable, the applications database and any instructional information provided has been designed to offer general
guidance for a particular tool’s use and while all attention is given to the accuracy of the data no project should be
attempted without referring first to the manufacturer’s technical documentation (workshop or instruction manual) or
the use of a recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to alter specifications and components
without prior notice. It is the responsibility of the user to ensure the suitability of the tools and information prior to
their use.
Instructions
Automotive Multimeter
Precautions
• Always refer to instructions before use.
• When using the multimeter please observe al normal safety precautions concerning
protection against the dangers of electrical current.
• Do not used the test leads if they are damaged or the insulation or wires are bared in any
way.
• Take care when working with voltages above 35V DC or 25V AC rms; these voltages are
regarded as a shock hazard.
• Before rotating the Function / Range rotary switch (F) to another function, disconnect the
test leads from the circuit under test.
• Do not use the multimeter in a potentially explosive atmosphere or where flammable
gases or material are present.
• Do not perform resistance, diode or continuity tests on live circuits. Always discharge
filter capacitors in power supplies and disconnect the power when making resistance or
diode tests.
• Never apply voltage or current to the multimeter that the exceeds the specified maximum
as shown in the tables above.
• Always refit the test probe covers when finished with meter.
• Observe standard workshop safety procedures when using the tester.
• Do not let the tester get wet or use in damp or wet conditions.