Laser BLU-BD3000 User Manual - 44 |
BLU-BD3000 User Manual
44 |
P a g e
Red key appears on
the screen
Selected function or operation is unavailable in current
state.
The reason may be:
1.
Software function limit of certain BD/DVD discs.
2.
Certain BD/DVD discs don’t support selected
function.
3.
The selected function is invalid in current mode.
Playing mode is
different from the
setting
For certain discs, the settings in the menu are invalid.
Please operate according to the disc menu.
No HDMI output
Check whether the HDMI connection between the
player and external device is loose, and insert properly if
yes.
Check whether your TV supports
720p/1080i/1080p/1080p24 HDMI output resolution,
and adjust the output resolution of the player according
to the specification of the TV.
HDMI always has output, and CVBS only has output at
720P. Therefore, certain user can’t watch BD images in
CVBS, because the output resolution in the setting
menu is too high; please set the resolution in HDMI
state to lower than 720P.
TV has no image
Please make sure that the TV has been connected to the
player through VIDEO OUT terminal or HDMI terminal.
Please make sure that the AV selection of the TV is
proper.
Video output
resolution is too low
Please reset the resolution in “Main menu – Display –
TV”, and set according to the video output signal format
of different terminals.
Aspect ratio can’t be
changed
The aspect ratio of certain DV/DVD is fixed.
Please refer to the TV manual to adjust the aspect ratio.
No audio
Check whether the audio signal connection between the
player and external device is loose, and insert properly if
yes. Please make sure that the audio output is set
properly in “Main menu – Audio”.
If a power amplifier is connected, please check whether
the input mode of the power amplifier is set properly.
Can’t hear desired
audio effect
In “Main menu – Audio – Speaker”, set the speaker
properly according to the connected device.