Laser Pegs 670-1570 COMBO Manual
670-1570 COMBO
For Boys And Girls
Ages 5 And Up
6 Bonus Models+
Any creation you can build
LIGHTED
CONSTRUCTION SET INCLUDES:
• 40 Laser Pegs®
• Triangle Power Base
• Instruction Manual
Requires 3-AA Batteries
Batteries NOT
Included
Laser Pegs® Parts List
There is No LED In The
90°
Peg
Please read this manual before
you begin! Failure to follow
this manual’s instructions may
result in damage to the Triangle
Power Base, AC Adapter and/
or Laser Pegs®. Not following
these instructions will void the
manufacturer’s warranty. The
packaging must be kept
because it contains important
information.
Compatible with other
construction kits
Each Laser Peg® is color coded on the circuit
board inside each shape. There is No LED In The
90 Degree Peg.
A Laser Pegs® link that
allows you to connect to
other construction kits.
Color
Code
WARNING:
CHOKING HAZARD
-
Small parts.
Not for children under 3 yrs.
Do not submerge in water.
Construction Compatible
Laser Pegs
®
Stackable
EN71, RoHS COMPLIANT
This product complies to
all safety requirements
of ASTM F 963
SQUARE
PEG
90°PEG
WHEEL
PEG
STRAIGHT
T-PEG
Y PEG
SQUARE
M-M PEG
STACKABLE
x6
x2
x10
x10
x2
x3
x5
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online
without Laser Pegs®Ventures LLC permission. Copyright 2013 © All
Rights Reserved US Patent #7,731,558 Additional Global & Multiple
Patents Pending. Laser Pegs®Ventures LLC. 8304 Consumer Ct
Sarasota FL. 34240. Contact: Support@LaserPegs.com
Triangle Power Base
To construct with Laser Pegs®, slide two pieces together to form a connection.
Slide each piece on and off smoothly.
1. Remove the three (3) screws.
2. Place three (3) AA batteries in the correct position - as displayed inside
the Triangle Power Base. (Batteries are to be inserted with the correct
polarity.)
3. Reassemble the Triangle Power Base and replace the three (3) screws.
4. Push the RED Power Button to turn on!
5. Do not mix old and new batteries.
6. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium, NiMH) batteries!
7. Exhausted batteries are to be removed from the Triangle Power Base.
8. Never connect more than 200 Laser Pegs®
9. Non-rechargeable batteries are not to be recharged.
10. Rechargeable batteries are only to be recharged under adult
supervision.
11. Rechargeable batteries are to be removed from the Triangle Power
Base before being recharged.
12. The supply terminals are not to be short-circuited.
WARNING!
Each Laser Peg® draws current from the batteries. Therefore,
the more pegs you use, the quicker you will deplete your battery power! As
the power weakens, the current will slowly fail and some Laser Pegs® will
illuminate (typically the reds and yellows) and some won’t. When the Laser
Pegs® dim, the Laser Pegs® are not broken, they just need stronger batteries
or an AC Adapter.
You have 3 simple options...
1. Use a 5-volt AC Adapter –available from www.LaserPegs.com.
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still
deplete rapidly the more Laser Pegs® you connect!
Connecting Pegs
Press button to
turn on/off
Push Power Button to cycle
through 3 different
light settings.
Power
Button
Peg Holes
AC Adapter Connection
Add 3-AA Batteries
3-AA Batteries
Remove LR-44 Batteries
Remove the three (3)
Phillips head screws with a
4mm screw driver.
Requires (3-AA) Batteries
Using an
AC Adapter
Remove all batteries from Laser Pegs® Triangle
Power Base before using the 5-volt AC Adapter.
When using an AC Adapter,
NEVER
place the Adapter
plug into the Triangle Power
Base’s top peg holes.
*To avoid short-circuits, keep metal objects and other unauthorized
materials from obstructing the peg holes.
The AC Adapter and the Triangle Power Base are to be regularly examined
for damage to the cord, plug, enclosure and other parts, and in the event of
such damage, they must not be used until the damage has been repaired.
Replacing Batteries
Never connect more than 200 Laser Pegs® when using a 5-volt (2000mA)
AC Adapter.
The LR-44 batteries are only for the
“Try-Me” function, they should be
removed from the Triangle Power
Base and replaced with 3-AA batter-
ies before giving it to the child.
45°PEG
x2
CROP PLAN - Also known as a
“Crop Duster”, is a light weight
aircraft equipped for spraying in-
secticides and fungicides on fields.
EXPLORER BOT - NASA’s Robonaut
2 will be the first dexterous
humanoid robot to explore into
space.
1
STEP
2
STEP
3
STEP
4
STEP
ATTACH MODEL TO THE
TRIANGLE POWER BASE