1. DL manuals
  2. Laser Technology
  3. Measuring Instruments
  4. TruPulse 200L
  5. User Manual

Laser Technology TruPulse 200L User Manual

Summary of TruPulse 200L

  • Page 1

    Laser technology, inc. Trupulse ® 200l user’s manual © l ti 2013 pm t rupulse 200l 130 00 01.

  • Page 2

    Lti trupulse 200l first edition - part number 0144873 copyright notice: information in this document is subject to change without notice and does not represent a commitment on the part of laser technology inc. No part of this manual may be reproduced in any form or by any means, electronic or mechan...

  • Page 3: Laser Technology, Inc.

    Laser technology, inc. Trupulse ® 200l user's manual languages 1. English 2. Español 3. Français 4. Deutsch 5. 日本語 6. 汉语被简化.

  • Page 5: Table

    Lti trupulse 200l user’s manual - table of contents page 1 table of contents Ǥ precautions ....................................................................................................................... 2 section 1 - introducing the lti trupulse 200l ............................................

  • Page 6: Precautions

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 2 precautions avoid staring directly at the laser beam for prolonged periods. The trupulse® 200l is designed to meet fda eye safety requirements and is classified as eye-safe to class 1 limits, which means that virtually no hazard ...

  • Page 7

    Section 1 - introducing the lti trupulse 200l page 3 section 1 - introducing the lti trupulse 200l congratulations on the purchase of your trupulse 200l, a cost-effective professional rangefinder. This compact and lightweight laser is a flexible tool for your measurement needs. Features of the trupu...

  • Page 8

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 4 unpacking your trupulse 200l when you unpack your trupulse 200l, check to make sure that you received everything that you ordered, and that it all arrived undamaged. Basic package • trupulse 200l • carrying case • lens cloth • ne...

  • Page 9

    Section 1 - introducing the lti trupulse 200l page 5 tilt sensor the integrated tilt sensor measures vertical angles that the trupulse 200l uses to calculate height and elevation and to determine slope-reduced horizontal distances. The instrument held level is at 0 ° , and is rotated up through +90 ...

  • Page 10: Section 2 - Quick Start

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 6 section 2 - quick start 1. Install the batteries (page 7) . 2. Press to power on the trupulse 200l. 3. Select a target such as a tree or a building. For this example, the target should be approximately 250 feet (82 yards or 75 me...

  • Page 11: Section 3 - Basic Operations

    Section 3 - basic operations page 7 section 3 - basic operations battery installation the trupulse 200l is powered by a 3 volt lithium battery commonly referred to as cr123a or also referred to as cr123. 1. Remove the battery compartment cover by gently pressing the clip to release the cover. 2. Ins...

  • Page 12

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 8 buttons the trupulse 200l has three buttons. With the trupulse 200l in your right hand and looking through the eyepiece, is located on top, near your index finger. And are located on the left side of the instrument. Measurement m...

  • Page 13

    Section 3 - basic operations page 9 display indicators figure #6 shows the lcd in-scope display. The trupulse 200l’s internal software is organized into options. Each option represents a specific measurement or setup function and has a corresponding display indicator. Refer to the figure and table b...

  • Page 14

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 10 inclination measurement mode the angle of inclination between the trupulse 200l at level and the target. Slope distance measurement mode straight line distance between the trupulse 200l and the target. Horizontal distance measur...

  • Page 15

    Section 3 - basic operations page 11 display indicator test to verify that all display indicators are working properly: 1. Start with the trupulse 200l powered off, press-and-hold . 2. Compare the in-scope display to the figure #6 (page 9) to verify that all indicators are working properly. 3. Relea...

  • Page 16

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 12 firmware revision number the firmware revision numbers provide manufacturing information about your trupulse 200l. To display the main and auxiliary firmware revision numbers: 1. Start with the trupulse 200l powered off, press-a...

  • Page 17

    Section 3 - basic operations page 13 neck strap to attach the neck strap: 1. Disconnect the anchor end of the strap using the buckle. 2. Feed loop around metal bar. 3. Thread the neckstrap through the loop. 4. Gently tighten to secure. 5. Reconnect anchor end of the strap using the buckle. Figure #9.

  • Page 18

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 14 units of measure the trupulse 200l allows you to choose the units of measure. Distance: meters, yards or feet. Inclination: degrees or % slope. To toggle the units selection: 1. From the measurement mode, press for 4 seconds to ...

  • Page 19

    Section 6 - target modes page 15 slope distance inclination horizontal distance vertical distance height routine section 4 - measurement modes when you power on the trupulse 200l, the last used measurement mode will be active. Press or to display the previous or next measurement mode. Figure #11 sho...

  • Page 20

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 16 notes about measurements press or to scroll through the individual measurement functions and see the results acquired for each function. • both inclination and distance are measured in the horizontal distance , slope distance , ...

  • Page 21

    Section 6 - target modes page 17 height routine height measurements involve a simple routine that prompts you to take 3 shots to the target: horizontal distance, inclination angle base and inclination angle top. The trupulse 200l uses these results to calculate the height of the target. Figure #12 s...

  • Page 22

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 18 4. Press-and-hold and aim to the top (or base) of the target. The measured inclination appears in the main display and is updated as long as you continue to hold . The measured inclination is “locked” when you release . The meas...

  • Page 23

    Section 6 - target modes page 19 during the vertical missing line routine: • press to re-shoot shot 1. • press to exit the missing line routine. 1. Select your first target and look through the eyepiece, using the crosshair to aim to your target. The indicator displays steady and the indicator flash...

  • Page 24: Section 5 - Target Modes

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 20 section 5 - target modes the trupulse 200l has five target modes which allow you to select or eliminate targets and to take the most accurate measurements possible in various field conditions . 1. From the measurement mode, pres...

  • Page 25

    Section 6 - target modes page 21 • the selected target mode remains active until you repeat the above steps and select a different target mode. • each time the trupulse 200l is powered on, it will return to the same target mode that was last used. • in closest and farthest modes, the minimum separat...

  • Page 26

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 22 section 6 - care & maintenance the battery is the only user-replaceable parts in the trupulse 200l. Do not remove any screws. To do so will effect or void the lti limited warranty. Temperature range the instrument is rated for a...

  • Page 27: Section 7 - Specifications

    Section 9 – specifications page 23 section 7 - specifications all specifications are subject to change without notice. Please refer to lti's website for current specifications. If you are not able to locate the information on the website or if you do not have internet access, please contact lti via ...

  • Page 28

    Laser technology, inc. Trupulse 200l user's manual 1 st edition page 24 section 8 - main display lcd characters the lcd main display is used to convey messages and measurement results. When all of the indicators are active the main display looks like: numbers 0-9: alpha characters: = a = g = r = d =...