Laserline manufacturing, inc. T-2000sd owner’s manual long range alignment laser 1810 se first street, suite h, redmond, or 97756 phone 541 548 0882 • fax 541 548 0892 • email laserline@empnet.Com website www.Laserlinemfg.Com.
© 2005 laserline manufacturing, inc. T-2000sd owner’s manual long range alignment laser table of contents section i introduction model t-2000sd product description & features 2 section ii laser safety laser safety considerations 3 description of compliance 5 section iii operator’s manual precautions...
Product description 2 features highly visible 5mw laser diode with round spot stable, rugged base with heavy duty tapered bearings smooth, precise 80 pitch horizontal and vertical tangents laser spot is fixed focused to infinity from maximum range without the need to frequently adjust the focus stab...
3 when operating class iiia lasers with an output of less than 0.005 watts (5mw): operators and crew members shall read this manual and become familiar with all-operating procedures and safety considerations on the vehicle. Post at least one laser warning placard (item 1) at each laser location. Tur...
4 laser safety (continued) the t-2000sd series laser is a class iiia laser product generat- ing less than 5 milliwatts of laser light. Class iiia lasers are used every day in construction and alignment applications. With every use, eye safety is a consideration. The operators of the laser are effect...
This laser complies with all applicable portions of title 21 of the code of fed- eral regulations, department of health, education, and welfare, food and drug administration, bureau of radiological health (federal register, volume 40, no.148, july 31, 1975). Note: the t-2000sd is a class iiia laser ...
6 precautions for handling instrument setup and operation (refer to page 7) mount the t-2000sd on any flat surface using a 5/8 x 11 bolt through a plate. Be sure the engagement length of the threads doesn’t exceed 7/16” power up by connecting the power cord to a 12vdc 1.5 source. Emission indicator ...
1. Instrument mount 2. Power connector 12 vdc 3. Emission indicator 4. Horizontal lock 5. Horizontal tangent 6. Vertical lock 7. Vertical tangent 8. Laser housing 9. Laser collimator 10. Fan lens mount ring 11. Fan lens (optional) 12. Scope adaptor with 8-40 tapped holes for weaver #63b 13. Weaver #...
Laser power 4.6mw nominal. Operating temperature -5 to +20f (-18 to +50c). Storage temperature -40 to + 150f (-40 to+65c). Base 5/8 x 11 threads/inch dimensions: length 9-1/2” (24.13cm) width 5-1/2” (14cm) height 5-7/8” (14.92cm) height (with tribrach) 8-1/2” (21.59cm) height (with tribrach & scope)...
1810 se first street, suite h, redmond, or 97756 phone 541 548 0882 • fax 541 548 0892 • email laserline@empnet.Com website www.Laserlinemfg.Com laserline mfg., inc. Service center provides trained personnel using authorized replacement parts to ensure the highest quality and fast turnaround. If any...
