Multibeam-laser.
Multibeam-laser 2 a b c d.
English 7 ideal for aligning on all surfaces automatic 5-spot 635 nm laser with magnetically damped pendulum system. All 5 lasers are set at right angles to each other. This makes practically all alignment tasks possible. Additionally, the housing can be turned to enable horizontal levelling, while ...
English 8 multibeam-laser 8 side beam calibration port (y-axix) 9 magnets 10 5/8” nut for connection to constrution tripod (mount from bottom). 11 connecting screw multibeam 5 12 screw mounting holes (accepts standard drywall screws) 13 slot for tightning belt 1 5 4 2 3 6 7 4 12 13 11 10 1 laser emi...
English 9 multibeam-laser l note: regularly check the calibration before use, after transport and after extended periods of storage. Technical data automatic levelling side-side range forward-backward + 4° + 6° accuracy + 2 mm / 10 m operating range (depending on room illumination) ca. 100 m power s...
English 10 multibeam-laser a 3 180° a 2 2 mm / 10 m = ok a3 a2 a2 a 1 a1 a2 4. 3. 2. 1. Preparing the calibration check it is possible for you to check the calibration of the laser. To do this, position the device midway between 2 walls, which must be at least 5 metre apart. Switch the device on. Th...
