1. DL manuals
  2. Lasertec
  3. Measuring Instruments
  4. CL3 HYBRID
  5. Instruction Manual

Lasertec CL3 HYBRID Instruction Manual

Manual is about: MULTI-LINE LASER

Summary of CL3 HYBRID

  • Page 1

    C l 3 h y b r i d m u lt i - l i n e l a s e r i n s t r u c t i o n m a n u a l.

  • Page 2: Safety

    2 safety read the following safety instructions before attempting to operate this product. Keep these instructions in a safe place or store in the carry case for future reference. Save all warnings and instructions for future reference. Warning: read and understand all instructions. ▪ use the laser ...

  • Page 3

    3 ▪ do not set up the tool at a position where the laser beam can cross any person at head height. ▪ do not let children come in contact with the laser. ▪ turn the laser off when it is not in use. Leaving the laser on increases the risk of staring into the laser beam. ▪ do not operate the laser arou...

  • Page 4: Item Checklist

    4 carry case 4x aa alkaline batteries lasertec cl3 hybrid item checklist please ensure the following items are included with your laser level. If anything is missing please contact your retailer. 2x laser targets inches cm 1 1 2 3 4 5 6 7 2 3 inches cm 1 1 2 3 4 5 6 7 2 3 the carry case contains a c...

  • Page 5: Laser Overview

    5 laser overview vertical laser port horizontal laser port 1/4” tripod thread control panel power / locking switch battery door cover.

  • Page 6

    6 laser overview: control panel line mode battery indicator pulse mode pulse mode indicator.

  • Page 7: Detector Overview

    7 detector overview line mode the detector is an optional accessory which can be purchased from your retailer. It is recommended that a hybrid line detector is used with this instrument for compatiblity with both the red and green laser beams. I i speaker sound on / off led speaker indicator laser s...

  • Page 8: Using Your Laser

    8 set up power supply battery replacement ▪ select a place as close as practical to the work site. Ensure the location is clear of traffic. ▪ place the instrument on a level surface such as a bench or mount. ▪ the instrument is powered by four aa alkaline batteries. ▪ remove the battery cover door a...

  • Page 9

    9 operation ▪ to turn the instrument on, slide the power / locking switch to the “on” position. Self levelling will commence and the horizontal beam will activate. ▪ if the instrument is outside the self levelling range the instrument will not level causing the laser beam to switch off and emit a be...

  • Page 10

    10 ▪ press the pulse mode button on the top of the instrument to enter into pulse mode. ▪ switch the detector on by pressing the power button. The speaker will beep indicating the instrument is operating. ▪ move the detector into the path of the laser beam. ▪ press the detection mode button to alter...

  • Page 11: Trouble Shooting

    11 error cause & solution laser does not turn on ▪ check the batteries. They may be in the wrong way or need replacing. ▪ check the battery compartment for signs of damage. Ensure they are clean and not bent. Laser does not remain on for long periods of use. ▪ check the batteries. ▪ check the batter...

  • Page 12: Care and Maintenance

    12 care and maintenance ▪ this is a precision measuring instrument and should always be handled with care and transported within the carry case provided. ▪ always slide the locking switch to the “off” position when transporting the instrument or moving around the job site. ▪ whenever possible, store...

  • Page 13: Warranty

    13 warranty australia “our goods come with guarantees that cannot be excluded under the australian consumer law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired ...

  • Page 14: Customer Support

    14 to assist you with any queries or technical questions please contact customer support australia: 1300 658 338 new zealand: 0800 367 527 customer support.

  • Page 15: Specifications

    15 specifications specifications lasertec cl3 hybrid product code 91220 warranty 3 years accuracy ±2mm at 10m operating range 50m (with optional detector) levelling range ±4° laser class 2 red / 3 green battery life 10 hours battery type 4x 1.5v aa vertical lines 2 horizontal lines 1 ip rating 54 we...

  • Page 16

    Www.Spoton.Com.Au.