Lasertec H1R Instruction Manual - Using Your Laser
Manual is about: Red Rotary Laser
of
16
7
USING YOUR LASER
Power Supply
The Lasertec H1R is powered by four AA alkaline batteries.
Setting Up
‣
Select a place as close as practical to the work site.
Ensure the location is clear of traffic.
‣
Attach the laser to a tripod or place on a level surface.
Ensure the unit is secured correctly and tightened in position.
Operation
‣
To turn the unit on press the power button. Self
levelling will commence and the laser will begin to rotate.
‣
If the unit is outside the self levelling range the unit will not
level causing the laser beam to flash continuously.