Lasertec HV1G Instruction Manual - Operation
Manual is about: Green Rotary Laser
of
16
8
Tilt alarm
‣ Once the unit has been levelled off the tilt alarm can be enabled by pressing
the tilt alarm button. The tilt alarm indicator light will flash for approximately
15 seconds. Once the light is constant the alarm is enabled.
‣ If the unit is disturbed while the alarm is active the unit will need to be
powered off and on again to reset its level position.
Operation
‣ To turn the unit on press the power switch. Self
levelling will commence and the laser will begin to rotate.
‣
If the unit is outside the self levelling range the unit will not
level causing the laser beam to flash continuously.