Laserworld CS-400G User Manual

Other manuals for CS-400G: Using Manual

Summary of CS-400G

  • Page 1

    Cs-400g user manual please read this manual carefully before use! Contents safety instructions ......................................................................................................... 2 operating the laser ................................................................................

  • Page 2

    User manual: cs-400g rev: 02/2009 page2 of 6 checking parts please check if all listed parts are included, and are not damaged. 1 x cs-400g laser 1 x power cable 1 x remote connector 2 x key 1 x manual safety instructions if the device has been exposed to great temperature changes, do not switch it ...

  • Page 3

    User manual: cs-400g rev: 02/2009 page3 of 6 operating temperature is 10~35 °c . Let laser cool off 10minutes after 2 hours of operation, to ensure maximum lifetime for the diode. Distance between laser aperture and projection screen should be not less than 1 meter. Do not turn device on and immedia...

  • Page 4

    User manual: cs-400g rev: 02/2009 page4 of 6 dmx mode maintenance / cleaning always disconnect from mains before cleaning/opening the laser. Regularly clean the interior from dust, especially ensure operation of the fans. Use a sponge with alcohol, rather than wet cloth or other chemical liquid, to ...

  • Page 5

    User manual: cs-400g rev: 02/2009 page5 of 6 technical specifications • lasersources: aircooled dpss laser • power (of the diodes): typical 400mw, minimum 300mw 532nm green • laserclass: 3b • modes: ilda, dmx 512, auto, music active • ilda: 25pin ilda standard sub-d shaped 25pin connector • galvos: ...

  • Page 6

    User manual: cs-400g rev: 02/2009 page6 of 6 eu-declaration of conformity we hereby confirm that the following device laserworld cs-400g complies with the essential safety requirements, laid down in the regulations of the committee to assimilate the provisions of law of all participating eu states o...