Laserworld CS-500RGBV User Manual

Summary of CS-500RGBV

  • Page 1

    Cs-500rgbv user manual please read this manual carefully before use! Contents safety instructions ......................................................................................................... 2 operating the laser .............................................................................

  • Page 2

    User manual: cs-500rgbv rev: 08/2009 page2 of 6 checking parts please check if all listed parts are included, and are not damaged. Included: 1 x cs-500rgbv laser 1 x power cable 1 x 9-pin plug (dongle) 2 x key 1 x manual safety instructions if the device has been exposed to great temperature changes...

  • Page 3

    User manual: cs-500rgbv rev: 08/2009 page3 of 6 keep surrounding dry and clean. T his unit should be keep dry, do not use in the rain or damp and dusty environment. Projector should be put in a water-proof housing when operated outside. Regularly open the device (see “cleaning” further down) to chec...

  • Page 4

    User manual: cs-500rgbv rev: 08/2009 page4 of 6 ilda mode when an ilda compatible interface is connected to the laser, the laser is automatically switched to ilda mode. Output is then controlled from a pc running software. The laser uses pins 4 and 17 of the idla signal to detect the presence of an ...

  • Page 5

    User manual: cs-500rgbv rev: 08/2009 page5 of 6 • accessories: power cable, key switch, interlock plug, manual • input voltage: ac 100~240v 50/60hz • power consumption: 50w • size: 300 x 240 x 150mm (w x d x h) • weight: 3.8kg • operating temperature: 10°-35°c ilda signal pin out of the standard ild...

  • Page 6

    User manual: cs-500rgbv rev: 08/2009 page6 of 6 eu-declaration of conformity we hereby confirm that the following device laserworld cs-500rgbv complies with the essential safety requirements, laid down in the regulations of the committee to assimilate the provisions of law of all participating eu st...