Laserworld DISCO-300G User Manual

Summary of DISCO-300G

  • Page 1

    Disco-300g user manual please read this manual carefully before use!.

  • Page 2

    User manual: disco-300g date: 01/2008 page 2 of 9 i table of contents page 1. Safety instructions 3 2. Operating determinations 4 3. Operation 5 4. Auto- music-mode 5 5. Operation with dmx 5 6. Ilda operation 7 7. Maintenance 8 8. Technical specifications 8 checking parts please check if the followi...

  • Page 3: 1. Safety Instructions

    User manual: disco-300g date: 01/2008 page 3 of 9 danger laser radiation! Avoid direct eye exposure! Laser radiation can cause eye damage and/or skin damage all protective measures for a safe operation of this laser must be applied. 1. Safety instructions - if the device has been exposed to drastic ...

  • Page 4

    User manual: disco-300g date: 01/2008 page 4 of 9 2. Operating determinations 6. The operator has to make sure that laser radiation – also reflected laser radiation –higher than the highest allowed level is avoided by technical or organisational measures. 7. Make sure that the used voltage is : ac 2...

  • Page 5: 3. Operation

    User manual: disco-300g date: 01/2008 page 5 of 9 3. Operation please note: for sound/dmx mode the two switches on the back of the device labelled “blanking” and “x/y” have to be up. When both switches are down the device can be controlled by an ilda output (such as our usb-box). Use this switch set...

  • Page 6

    User manual: disco-300g date: 01/2008 page 6 of 9 the device uses 11 channels, so if you set the first on dmx address “1” the second should be dmx address “12” and so on. The dmx channels are as following: channel function 1 mode: 0-69 laser off; 70--139 sound mode; 140- 209 animated sound mode (see...

  • Page 7: 6. Ilda Operation

    User manual: disco-300g date: 01/2008 page 7 of 9 6. Ilda operation connect the laser to an ilda output (as our usb-box) using the adaptor shipped with the device, switches “blanking” and “x/y” on the back of the laser have to be down. You can now operate the laser with ilda. Use this switch setting...

  • Page 8: 7. Maintenance

    User manual: disco-300g date: 01/2008 page 8 of 9 7. Maintenance maintenance should be performed every 15-day period, by using a sponge which is dipped with alcohol, rather than wet cloth or other chemical liquid, to clean the mirror. Always disconnect from the mains when the device is not in use or...

  • Page 9

    User manual: disco-300g date: 01/2008 page 9 of 9 eu- declaration of conformity we hereby confirm that the following device disco-300g complies with the essential safety requirements, laid down in the regulations of the committee to assimilate the provisions of law of all participating eu states on ...