Lasko 5130 Operating Manual
New 3/04
1
5130ES
New 3/04
8
5130ES
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
OSCILLATING CERAMIC HEATER
WITH REMOTE CONTROL
MODEL 5130
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
1. Read all instructions before using Heater.
2. Use this Heater only as described in this manual. Any
other use not recommended by the manufacturer may
cause fire, electrical shock, or injury to persons.
3. Make certain that the power source conforms to the
electrical requirements of the Heater.
4. Extreme caution is necessary when any Heater
is used by or near children or invalids and when-
ever the Heater is left operating unattended.
5. This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric
shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the out-
let, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this
safety feature.
6. Where possible, avoid the use of extension cords be-
cause the extension cord may overheat and cause a
risk of fire. If they must be used, minimize the risk of
overheating by ensuring that they are UL listed, a
minimum No. 14 AWG, rated not less than 1875 watts.
Never use a single extension cord to operate more
than one Heater.
7. Do not operate any Heater with a damaged cord or
plug or after the Heater malfunctions, has been dropped
or damaged in any manner. Return Heater to autho-
rized service facility for examination, electrical or me-
chanical adjustment or repair.
8. Unplug power cord before servicing or moving the
Heater. Always unplug Heater when not in use.
WARNING:
DO NOT DEPEND ON THE ON/OFF
SWITCH AS THE SOLE MEANS OF DISCONNECT-
ING POWER WHEN SERVICING OR MOVING THE
HEATER. ALWAYS UNPLUG THE POWER CORD.
9. Do not insert or allow fingers or foreign objects to
enter any ventilation or exhaust opening as it may
cause an electric shock or fire, or damage the Heater.
Do not block or tamper with the Heater in any man-
ner while it is in operation.
10.To prevent a possible fire, do not block air intakes or
exhaust in any manner. Do not place on soft sur-
faces, like a bed, where openings may become
blocked.
11.Always place the Heater on a stable, flat, level surface
when operating, to avoid the chance of the Heater over-
turning. Locate the Power Cord so the Heater or other
objects are not resting on it. Do not run Power Cord under
carpeting. Do not cover Power Cord with throw rugs, run-
ners, or the like. Arrange Power Cord away from room
traffic and where it will not be tripped over.
12. This Heater is hot when in use. To avoid burns, do
not let bare skin touch hot surfaces. Always use
handle when moving this Heater. Keep combustible
materials, such as furniture, pillows, bedding, papers,
clothes and curtains at least 3 feet (0.9 m) from the
front of the Heater and keep them at least 1 foot (0.3
m) from the sides and rear.
13.A Heater has hot and arcing or sparking parts inside.
It must NOT be used in potentially dangerous loca-
tions such as flammable, explosive, chemical-laden
or wet atmospheres. This Heater is intended for gen-
eral use ONLY.
14.This Heater is not intended for use in wet or damp
locations. Never locate a Heater where it may fall
into a bathtub or other water container.
15.Do not use Heater outdoors.
WARNING:
REDUCE THE RISK OF FIRE OR ELEC-
TRIC SHOCK – DO NOT USE THIS HEATER WITH ANY
SOLID STATE SPEED CONTROL DEVICES.
GENERAL SAFETY INFORMATION
When using electrical appliances,
basic precautions should always be followed
to reduce the risk of fire, electric shock and injury to person,
including the following:
SAVE THESE INSTRUCTIONS
MODELO 5130
NOTAS
El manual imprimió en la China