Summary of 76044-1 SST
Page 1
Owner’s manual model 76044-1 rc toys.
Page 2
Thank you for purchasing a latrax 1/18-scale model. Your latrax model is a 4wd sst race truck that puts you in the driver’s seat for intense fender-to-fender, high flying action. Experience high-speed head-to-head competition at the track or in your own backyard with big-air jumps and full-throttle ...
Page 3
Latrax offers a full-service, on-site repair facility to handle any of your service needs. Maintenance and replacement parts may be purchased directly from latrax by phone or online at latrax.Com. You can save time, along with shipping and handling costs, by purchasing replacement parts from your lo...
Page 4
Batteries and battery charging your model uses a rechargeable battery that must be handled with care for safety and long battery life. Make sure to read and follow all instructions and precautions that were provided with the battery pack and the battery charger. It is your responsibility to charge a...
Page 5
Rear camber link steering servo front camber link rear differential rear body mount rear bumper chassis receiver box shock battery compartment receiver box plug electronic speed control pinion gear front body mount battery hold-down motor front bumper spur gear rear suspension arm toe link front dif...
Page 6
Getting started installing transmitter batteries your transmitter uses 4 aa batteries. The battery compartment is located in the base of the transmitter. 1. Remove the battery compartment door by pressing the tab and sliding the door open. 2. Install the batteries in the correct orientation, as indi...
Page 7
The 2.4ghz radio system the 2.4ghz radio system your model includes a 2.4ghz transmitter. When powered on, the transmitter will automatically locate and lock onto an available frequency, allowing multiple models to be raced together without frequency conflicts. The included radio system has been pro...
Page 8
Radio system rules • the 2.4ghz transmitter has a directional antenna. For maximum range, hold the transmitter upright and pointed in the direction of the model. Pointing the transmitter away from the model will reduce radio range. • always turn your transmitter on first and off last. This procedure...
Page 9
Radio system controls using reverse: while driving, push the throttle trigger forward to apply brakes. Once stopped, return the throttle trigger to neutral. Push the throttle trigger forward again to engage proportional reverse. Using the radio system the 2.4ghz radio system has been adjusted at the...
Page 10
Radio system basic adjustments steering trim the steering trim knob located on the face of the transmitter adjusts the neutral (center) point of the steering channel. If your model pulls to the right or left when the steering wheel is centered, turn the knob until the model drives straight when the ...
Page 11
Transmitter led codes led color / pattern name notes solid green normal driving mode see page 9 for information on how to use the transmitter controls. Slow red (0.5 sec on / 0.5 sec off) binding see page 10 for more information on binding. Flashing medium red (0.25 sec on / 0.25 sec off) low batter...
Page 12
Adjusting the electronic speed control profile selection the speed control is factory set to sport mode (100% forward, brakes, and reverse). You can program the speed control to disable reverse (race mode) or to allow 50% power (patent-pending training mode) using the following mode selection proced...
Page 13
5. Move the throttle trigger forward again to engage reverse (profile #1). The led will turn off. Once full reverse power is reached, the led will shine red. 6. To stop, return the throttle trigger to neutral. Note that there is no programmed delay when changing from reverse to forward. Use caution ...
Page 14
Now it’s time to have some fun! This section contains instructions on driving and making adjustments to your model. Before you go on, here are some important precautions to keep in mind. • allow the model to cool for a few minutes between runs. This is particularly important when using high-capacity...
Page 15
Running in wet conditions your model is designed with water-resistant features to protect the electronics in the model (receiver, servos, electronic speed control). This gives you the freedom to have fun driving your model through puddles and other wet conditions. Though highly water resistant, the ...
Page 16
Maintaining your model your model requires timely maintenance in order to stay in top running condition. The following procedures should be taken very seriously. Inspect the vehicle for obvious damage or wear. Look for: 1. Cracked, bent, or damaged parts 2. Check the wheels and steering for binding....