Latrex 335 Manual - page 12
Motor boat LATREX 335 SIA LATREX
12/14
If you have already brown spots, you can use most of all available metal
cleanings to take care of the stainless steel fittings or you take normal polish like
you use it for the hull.
Of course – all the best care can not help, if in the first place the fittings are not
made out of the right material or the stainless steel has not been treated correct.
Before you will buy the fitting, ask e.g. if the fitting has been polished electrical.
Repairs
Repairs at the hull (polyester full laminate and polyester sandwich laminate) can
be implemented by a reliable workshop considering the general rules for the
processing of polyester resin. The interior construction was designed in such a
way that a non-destructive elimination of defects can be realized. In regard to the
technical equipment you may contact a reliable workshop or your dealer, too.
Changes
Ask the dealer for information about what could be done by yourself and
especially what could not be done by yourself. You could endanger your safety
and lose your warranty.
WINTER STORAGE
The boat should be lifted with a crane which is equipped with a special traverse.
If you use a harness you should contact an expert.
During the preparation and search for a winter storage place, you will receive
help from your LATREX-boat representative.
TRANSPORT BY ROAD
With an appropriate towing vehicle the boat also can be transported with a
trailer. Your dealer can give you advice and assist you in choosing an
appropriate trailer. The national road traffic regulations are to be observed.