Launch CR-HD User Manual - page 19

LAUNCH                                                                      CR-HD User's Manual

10

4.2.2 Clear DTC

Select [Clear DTC] and press [ ], the system will switch to the following 

screen. 

Figure 4-11

Select one desired item and press [ ], a prompt message will appear on the 

screen, as shown in Figure 4-12. 

Figure 4-12

Press [ ] to erase DTCs, and if successfully, “Succeed” will be shown on the 

screen. Press [ ] to exit and return to the Function screen.

If it fails to communicate with ECU, a screen similar to Figure 4-13 will appear: