Original instructions 8204216 gasoline water pump figure sku 8204216 model mq6638-fuzhou gasoline high pressure pump figure fuzhou launtop m&e co., ltd..
Original instructions 8204216 no. 56, jinshan road, jinshan industrial park, fuzhou, china.
Original instructions 8204216 introduction thank you for purchasing the products of our company. Our company’s gasoline water (high pressure)pump applies the high quality self-priming pump. The engine is air-cooled, direct injection, 4-stroke, gasoline engine or air-cooled, single cylinder,4-stroke ...
Original instructions 8204216.
Original instructions 8204216 contents gasoline water pump overall figure……………………………(1) gasoline high pressure pump overall figure……………………(1) chapter 1 main technical specifications and parameter 1. Gasoline water pump specifications and parameter …………….(3) 2. Gasoline high pressure pump specificati...
Original instructions 8204216 chapter 1 main technical specifications and parameter 1. Gasoline water pump specifications and parameter self - primi ng w ater pum p type p50c p80c p100c suction port dia(mm) 50(2inch) 80(3inch) 100(4inch) rated displacement (m³/h) 21 36 85 max.Head(m) 26 25 25 rated ...
Original instructions 8204216 (1) gasoline water pump 50 c economic pump suction port dia(mm) (2) gasoline high pressure pump 40 c economic pump suction port dia(mm) h ig h type f40c(l) f40c(l)-2 f50c(l) suction port dia(mm) 40 40 50 discharge port dia(mm) 25x2;40x1 50x1 capacity(m³/hr) 17(at 35 m h...
Original instructions 8204216 chapter 2 main structure and use 1. Main structure. Water pump and high pressure pump consists of gasoline engine and pump kit. The pump is fixed on a frame with shock absorbers. The self-priming pump consists of pump body, pump cover, flow guidance, impeller and seals,...
Original instructions 8204216 (2)start the engine please refer to manual of engine. 4. Caution (1) the fuel of the pump is gasoline fuel , not allow mixing of them. Keep fire and other explosives and inflammables away from the pump. Operate the pump on a level surface to prevent fuel spilling. (2) k...
Original instructions 8204216 between steel part “#7” and pump cover. When fixed it, do not hit by force to prevent wear slice fracture. Please see fig2. Fig 2 stucture diagram of machinery seal 1. Seal ring 2.Ceramics moving ring 3. Graphite static ring 4.Corrugated pipe 5.Washer 6.Spring 7.Steel p...
Original instructions 8204216 chapter 3 analysis of malfunction and remedy malfunction cause remedy t h e p u m p ca n n o t d o p u mp in g fill water is not enough refill water into the pump inlet pipe leakage check inlet pipe and connector of pipe change pipe or tighten the screw speed of pump is...
Original instructions 8204216 malfunction cause remedy p owe r c onsum pti on of p ump i s too lar ge there is a rub between impeller and flow guidance listen to the sound carefully, whether the impeller is clashed with the case and then to adjust the impeller is obstructed by weeds or eyewinker. Ch...
Original instructions 8204216 impeller damage stop the machine for checking and change the impeller with a new one.
Original instructions 8204216.
Original instructions 8204216.
Original instructions 8204216.
Original instructions 8204216.
Original instructions 8204216.
Original instructions 8204216.
Original instructions 8204216.
Original instructions 8204216 ec declaration of conformity we herewith declare, fuzhou launtop m&e co., ltd. No. 56, jinshan road, jinshan industrial park, fuzhou, china we declare that the following appliance complies with the appropriate basic safety and health requirements of the ec directives (s...
Original instructions 8204216 note: the person importing the products becomes responsible for ensuring that they comply with the directives which apply to them. At very least, it is recommended that the importer obtain a copy of the original declaration of conformity from manufacture..
