LauraStar Magic Evolution 723 User Manual - page 10
Why have blowing and vacuum?
Hints on usage
8
Angora / Wool
•
Steam iron about 10 cm from the surface of the material, in order not to damage it.
•
Shake the garment by hand so that it regains its normal shape.
Silk
Vertical removal of creases
Hang the garment on a coat
hanger or hold it up.
With a sweeping movement from
top to bottom lightly touch the
material while giving short bursts
of steam.
Note: It is easy to remove creas-
es from most materials, except
for cotton, linen and some silks.
If it is difficult to remove the
creases from a material, iron it as
normal on the ironing board.
Special materials
• Velvet
• Corduroy
• Jersey
If you are not using a
Softpressing soleplate, steam
iron 2-3 cm from the surface of
the material, then finish by hand.
Steam iron silk in the normal
way.
In the case of dark silk you are
advised to use a Softpressing
soleplate.
HOT
•
•
•
•
•
•
•
•
•
•
•
•
•
•
English
Perfect ironing requires steam to be injected into the fabric. This is a requirement for the complete
removal of creases. Do not continually inject steam into fabric: press the steam control button intermit-
tently. For this the LauraStar™ Magic Evolution / II system uses the same methods as professional dry
cleaning: vacuum and blowing.
To improve the quality of ironing and increase the autonomy of your appliance, steam iron the material first
and then re-iron it without steam, in order to dry the material.
blowing
vacuum
V
e
lvet
Back
Buttons
Welt
Legs
Inside
Sleeves
Bottons
Top
Pleats
and collar and creases
and lining
and collar
MagicEVO2-PreEVO2 Anglais 28.1.2003 10:16 Page 10