Lava 2SP-PCI Installation Manual

Summary of 2SP-PCI

  • Page 1

    Lava 2sp-pci installation manual rev. B00 lava computers 2sp pci serial 2 p.N. Moko l73.1 made in canada.

  • Page 2: Windows Hardware And

    Windows hardware and driver installation 1. Before opening the casing of your computer, make sure that all power is off. 2. Locate an unused pci slot and insert the 2sp-pci card into it. Ensure that it is well seated, and screw the metal bracket of the board to your pc’s casing. 3. Locate an unused ...

  • Page 3

    5. When windows starts, it will find a 2sp-pci controller and will ask you for a driver for this device. When prompted, insert the installation diskette into your floppy drive. After copying the necessary files from the diskette, windows may restart your pc in order to complete the installation of t...

  • Page 4

    Connecting a non-printer device (e.G. External drive or parallel scanner) to the 2sp-pci's parallel port in windows 95/98/me (not windows 2000/xp) some parallel port devices require parallel ports that use standard (legacy) isa lpt addresses (0278h or 0378h). Because the 2sp-pci card is a fully comp...

  • Page 5

    4. Use the up/down arrows to scroll to one of the following range settings, or type them in manually: 0278 – 027f 0378 – 037f 0238 – 023f 02b8 – 02bf 5. After one of these has been entered, click ok. Windows will verify whether you would like to force this particular configuration rather than the au...

  • Page 6: Without Changing I/o

    Changing the com numbering of your 2sp-pci ports (windows 95/98/me only) changing the com numbering of your 2sp-pci ports (windows 2000/xp only) unless you already have more than 4 com ports installed in your pc, windows will by default configure the serial ports of the 2sp-pci as com 5 and com 6. I...

  • Page 7: Release Notes:

    Using zip drives with the 2sp-pci release notes: note: the default input/output range for the 2sp-pci card works with zip™ drives using new iomegaware™ software. The instructions "connecting a non-printer device" given above apply to zip™ drive users using old versions of iomegaware™. For best resul...

  • Page 8: Lava Computer Mfg Inc.

    Lava computer mfg inc. Lava technical support 9:00 am to 5:30 pm monday to friday (eastern time) tel: +416 674-5942 fax: + 416 674-8262 e-mail: tech@lavalink.Com internet: www.Lavalink.Com this device complies with part 15 of the fcc rules. Operation is subject to the following conditions: (1) this ...