Lava CG 141 User Manual - page 7
6
Installing RUIM/SIM card and battery:
1.
Hold on Power on/off Key for about three seconds to switch on/off the phone.
2.
Remove the battery cover.
3.
Remove the battery.
4.
Follow the sign for GSM SIM and CDMA UIM on the phone to install SIM1 and
SIM2. Please make sure that the golden contacts of the card face into the
phone then push the card gently until it fixes itself in the card slot.
5.
Place the battery with its golden contact part facing the set phone battery
contact piece, and then replace the battery cover.
Memory Card
The Memory Card is pluggable storage cards inside the mobile phone. To insert
the Memory Card, open its latch, insert the card into the card slot, and then close the latch. To
remove the Memory Card, open its latch and slightly take the card out. And then close the latch.
Charging the Battery
1.
Insert the lead from the charger to the socket, and connect the charger to a
standard wall AC socket.
2.
After the completion charging, disconnect the charger from the phone and AC
socket.
Powering On/Off the Mobile Phone
1.
Hold the End key for a while to power on the mobile phone.
2.
The phone will automatically search for available networks.
Important password
Phone lock password is 0000 by default.
Phone Lock Code
Phone code could prevent your phone from illegal use. The default phones code is 0000. Please
change it to your own as soon as possible.
Notes: Please remember the code; otherwise some service expense may happen.