Lava Computer SP-PCI Installation Manual

Summary of SP-PCI

  • Page 1

    Lava sp-pci installation manual rev. B00 lava computers sp pci p.N. Moko l82.0 made in canada pn moko s-1 made in japan 0255351.

  • Page 2: Windows Hardware And

    Windows hardware and driver installation pci slot screw for attaching card bracket to pc casing serial port parallel port 1. Before opening the casing of your computer, make sure that all power is off. 2. Locate an unused pci slot and insert the sp-pci card into it. Ensure that the card is well seat...

  • Page 3

    Order to complete the installation of the sp-pci card. Any plug and play devices attached to the sp-pci will now also be detected and installed. Windows xp may display a message to the effect that the drivers are not digitally signed. This warning can be ignored. 6. To view how windows has installed...

  • Page 4

    Connecting a non-printer device (e.G. External drive or parallel scanner) to the sp-pci's parallel port in windows 95/98/me (not windows 2000/xp) some parallel port devices require parallel ports that use standard (legacy) isa lpt addresses (0278h or 0378h). Because the sp-pci card is a fully compli...

  • Page 5

    4. Use the up/down arrows to scroll to one of the following range settings, or type them in manually: 0278 – 027f 0378 – 037f 0238 – 023f 02b8 – 02bf 5. After one of these has been entered, click ok. Windows will verify whether you would like to force this particular configuration rather than the au...

  • Page 6

    Changing the com numbering of your sp-pci port (windows 95/98/me only) changing the com numbering of your sp-pci port (windows 2000/xp only) unless you already have more than 4 com ports installed in your pc, windows will by default configure the sp-pci as com 5. If you wish to change this assigned ...

  • Page 7: Release Notes:

    Using zip drives with the sp-pci release notes: note: the default input/output range for the sp-pci card works with zip™ drives using new iomegaware™ software. The instructions "connecting a non-printer device" given above apply to zip™ drive users using old versions of iomegaware™. For best results...

  • Page 8: Lava Computer Mfg Inc.

    Lava computer mfg inc. Lava technical support 9:00 am to 5:30 pm monday to friday (eastern time) tel: +416 674-5942 fax: + 416 674-8262 e-mail: tech@lavalink.Com internet: www.Lavalink.Com this device complies with part 15 of the fcc rules. Operation is subject to the following conditions: (1) this ...