Lava Heat Ember Owner's Manual - Assembly Instructions

9

ASSEMBLY INSTRUCTIONS

AA

(not included)

 Battery(1.5V)

Step 5

Step 6

+

-

AA

Step5: Place battery incompartment below control panel.

Warning:This appliance requires installation

by a competent person. Proper assembly is

the responsibility of the installer.

Step6: Place the gas cylinder (not included) into the base 

assembly , and fix it with fixing chain.

 Attach the regulator 

to the cylinder, turn clockwise to tighten it securely, and 

then close the door.

Note: Make sure to check for leaks once the cylinder has 

been replaced. (Refer to the “check for leaks” section on 

page 10)

Tighten