Lava quattro-pci installation manual rev. B00 lava computers quad serial pci p.N. Moko l75.2 made in canada pn moko s-1 made in japan 0255351.
Windows nt 4.0 installation 1. With the power turned off, insert the quattro-pci card into any free pci slot in your pc. Boot nt logging on as “administrator”. 2. Place the quattro-pci installation diskette into your floppy drive and select run from the start menu. When prompted type: a:t4.0\setup...
Dos & windows 3.X installation 1. With the power turned off, insert the quattro-pci card into any free pci slot in your pc. Turn your pc on. Boot to dos. 2. Place the quattro-pci installation diskette into your floppy drive. In the win3.11 subdirectory of this diskette you will find a file called “l...
1. With the power turned off, insert the quattro-pci card into any free pci slot in your pc. Make sure the card is well seated. Insert the bracket with ports c and d into a free slot. If you must detach the cables from the card to do so, be sure to install the cables back onto the card with the red ...
The quattro-pci hardware appears in device manager in two places: under the multi-function adapters tree and as part of the ports tree. Please note that any changes to the resources (i/o address & irq) used by any one of the four ports on the quattro-pci must be made through the resources page of th...
Changing the com numbering of your quattro- pci ports (windows 95/98/me only) unless you already have more than 4 com ports installed in your pc, windows will by default configure the quattro-pci ports as com 5 through com 8. To change the com number of any of these ports (e.G. Reassign com 5 to be ...
Lava computer mfg inc. Lava technical support 9:00 am to 5:30 pm monday to friday (eastern time) tel: +416 674-5942 fax: + 416 674-8262 e-mail: tech@lavalink.Com internet: www.Lavalink.Com this device complies with part 15 of the fcc rules. Operation is subject to the following conditions: (1) this ...
