LAVAMAT 86850 Instruction Booklet

Summary of 86850

  • Page 1

    Lavamat 86850 instruction booklet washing machine 132966571.Qxd 21/01/2008 16.14 pagina 1 downloaded from washingmachine-manual.Com manuals.

  • Page 2: Dear Customer

    Dear customer thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are se...

  • Page 3

    Contents instruction booklet safety information 6 product description 9 detergent dispenser drawer 9 control panel 10 display 11 first use 13 setting the language 13 setting the time 13 personalization 14 setting the brightness 14 setting the contrast 14 setting the acoustic signal 14 return to main...

  • Page 4

    Select the child lock option 19 select the time saving option 20 select the start/pause 20 select the delay start 20 altering an option or a running programme 21 interrupting a programme 21 cancelling a programme 21 opening the door after the programme has started 22 at the end of the programme 22 w...

  • Page 5

    Water inlet filter 34 frost precautions 35 emergency emptying out 35 what to do if... 36 technical data 40 consumption value 41 installation 42 unpacking 42 positioning and levelling 44 water inlet 44 water-stop device 45 water drainage 45 in the interest of the environment 47 electrical connection ...

  • Page 6

    6 instruction booklet safety information prior to using for the first time ● the safety of aeg/electrolux appliances complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. ...

  • Page 7

    7 ● do not use your washing machine to wash articles with whalebones, material without hems or torn material. ● always unplug the appliance and turn off the water supply after use, clean and maintenance. ● this appliance is provided with a white drum light. It is class 1, in accordance with iec 6082...

  • Page 8: Vertical.

    ● do not overload the appliance. See the relevant section in the user manual. ● before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must not be ...

  • Page 9

    Product description your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Detergent dispenser drawer compartment for detergent used for prewash. The prewash detergent is added at the beginning of the wash programme. Comp...

  • Page 10: 2 3

    Control panel henceforth the programme selector dial, the buttons and the display will be indicated with the numbers given in this table. Time button display start/pause button delay start button programme selector dial temp. (temperature) button spin (reduction) button option button ok button 1 2 3...

  • Page 11: 7.8

    Display (7) temperature - symbol spin speed, night cycle , rinse hold - symbols child safety lock - symbol time saving (daily) (super quick) - symbols delay start - symbol option symbols: prewash , stain , sensitive , extra rinse end of the programme washing programme duration or delay time - symbol...

  • Page 12: 7.9

    Programme progress display after having pressed the button 8 , the display shows the running phase of the washing program 7.9 . On the display you can see also the description of the selected type of fabric, an animated bar, that indicates the carried out cycle and the remaining one, the duration of...

  • Page 13: Important!

    13 use first use ensure that the electrical and water connections comply with the installation instructions. Remove the polystyrene block and any material from the drum. Run a cotton cycle at 90 or 95°c , without any laundry in the machine, to remove any manufacturing residue from the drum and tub. ...

  • Page 14: Buzzer Menu. Press Button

    14 use personalization this appliance is provided with a settings menu that allows you to modify the factory settings as you want. When you switch on the machine, by turning the programme selector dial, press the button 4 to activate the options menu. By pressing again the same button you can move t...

  • Page 15: Consumption.

    15 use return to main menu this setting function allows you to return to the option menu. Locate the back option by pressing the button 4 . Press the button 5 to confirm your choice. Daily use load the laundry 1. Open the door by carefully pulling the door handle outwards. Place the laundry in the d...

  • Page 16: Dial (1)

    Select the required programme by means of programme selector dial (1) you can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «washing programmes»). Turn the programme selector dial to the required programme. The programme selector d...

  • Page 17: Chapter.

    17 use night cycle: by selecting this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed, this washing cycle is very noiseless and it can be selected at night or in times with a more economical power rate . On some ...

  • Page 18

    18 use select the stain option select this option to treat heavily soiled or stained laundry with stain remover (extended main wash with time optimised stain action phase). This option is not available with a temperature lower than 40°c. Attention! If you wish to perform a programme with the stain o...

  • Page 19: Note

    19 use to change the memorized programme setting repeat the procedure from the beginning. Note if the memory space is already used by a programme previously selected, the display will show the message «memory full. Press ok to overwrite it. Press option to cancel». Press then button 5 to memorize th...

  • Page 20: Again.

    20 use select the time saving option (button 6) the washing machine proposes by default the washing cycle for «normally soiled laundry». The washing cycle can be shorted by means of this button. This option can be selected with the washing programmes for cottons, synthetics and delicates. By pressin...

  • Page 21

    21 use you can cancel the delay time at any moment, before you press the button 8 . Cancelling the delayed start: ● set the washing machine to pause by pressing the button 8 ; ● press the button 9 until the symbol disappears on the display ● press the button 8 again to start the programme. The delay...

  • Page 22: Temperature!).

    22 use opening the door after the programme has started first set the machine to pause by pressing the button 8 . ● if the messages «paused» is steady on the display, the door can be opened. ● if the messages «paused» and «door locked» appear alternately on the display , this means that the machine ...

  • Page 23: Type of Laundry

    23 washing programmes washing programmes programme/ temperature type of laundry options description of the programme cottons/linen 95°-cold white and coloured cotton (normally soiled item) spin reduction/rinse hold/night cycle prewash - stain(*) - sensitive - extra rinse time saving main wash, rinse...

  • Page 24: Type of Laundry

    24 washing programmes washing programmes programme/ temperature type of laundry options description of the programme delicate rinses separate rinse cycle for hand washed items spin reduction/rinse hold/night cycle - extra rinse rinses short spin max load kg 7 spin separate spin for cottons spin redu...

  • Page 25: Type of Laundry

    25 washing programmes washing programmes programme/ temperature type of laundry options description of the programme outdoor sports 40°-cold special programme for sport clothes spin reduction/rinse hold - extra rinse main wash rinses short spin max load kg 2.5 20 min. - 3kg 30° for slightly soiled f...

  • Page 26

    26 programme informations programme informations hygiene the washing program for white cottons. This program eliminates the micro-organisms thanks to the washing by 60°c and an additional rinse. So that this action is more effective, place into the compartment marked with blue arrow a special additi...

  • Page 27

    27 programme informations programme informations economy this programme can be selected for slightly or normally soiled cotton items. The temperature will decrease and the washing time will be extended. This allows to obtain a good washing efficiency by saving energy. Silk delicate washing programme...

  • Page 28: Safety Pins, Pins).

    28 preparing the wash cycle preparing the wash cycle sorting out the laundry follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Temperatures before loading the laundry never ...

  • Page 29

    29 preparing the wash cycle maximum loads recommended loads are indicated in the washing programme charts. General rules: cotton, linen: drum full but not too tightly packed; synthetics: drum no more than half full ; delicate fabrics and woollens: drum no more than one third full. Washing a maximum ...

  • Page 30

    30 preparing the wash cycle rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains: treat with bleach, rinse well (whites a...

  • Page 31: Just

    31 preparing the wash cycle the washing machine incorporates a recirculation system which allows an optimal use of the concentrated detergent. Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme. Any fabric softener or starching additives must be pou...

  • Page 32

    32 care and cleaning care and cleaning you must disconnect the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling the water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this s...

  • Page 33

    33 care and cleaning 2. Remove the conditioner insert from the middle compartment. 3. Clean all parts with water. 4. Put the conditioner insert in as far as it will go, so that it is firmly in place. 5. Clean all parts of the washing ma- chine, especially the nozzles in the top of the washing-in cha...

  • Page 34: 3. Open The Pump Door.

    34 care and cleaning 3. Open the pump door. 4. Place a container close to the pump to collect any spillage. 5. Release the emergency emptying hose, place it in the container and remove its cap. 6. When no more water comes out, unscrew the pump and remove it. Always keep a rag nearby to dry up spilla...

  • Page 35: 1. Turn Off The Water Tap.

    Water inlet filter if you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. 1. Turn off the water tap. 2. Unscrew the hose from the tap. 3. Clean the filter in the hose with a stiff brush. 4. Screw the hose back onto the tap. Frost precau...

  • Page 36

    36 what to do if... What to do if... Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local service centre, please carry out the checks listed below. During machine operation it is possible that t...

  • Page 37

    37 what to do if... Problem possible cause/solution the machine fills then empties immediately: the end of the drain hose is too low. ● refer to relevant paragraph in «water drainage» section. The machine does not empty and/or does not spin: the drain hose is squashed or kinked. «cannot drain the wa...

  • Page 38

    38 what to do if... There is water on the floor: too much detergent or unsuitable detergent (creates too much foam) has been used. ● reduce the detergent quantity or use another one . Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the wate...

  • Page 39

    39 what to do if... No water is visible in the drum: machines based on modern technology operate very economically using very little water without affecting performance. The machine vibrates or is noisy: the transit bolts and packing have not been removed. ● check the correct installation of the app...

  • Page 40

    40 technical data dimensions width height depth (door included) 60 cm 85 cm 63 cm 230-240 v/50 hz 2050 w 10 a electrical connection voltage - overall power - fuse power supply voltage/frequency total power absorbed minimum fuse protection water supply pressure minimum maximum 0,05 mpa 0,8 0 mpa maxi...

  • Page 41

    41 consumption value the consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. (*) «economy 60°c» with a load of 7 kg is the reference programme for the ...

  • Page 42

    42 installation installation unpacking all transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. After removing all the packaging, carefully lay machine on it’...

  • Page 43: Spacer E.

    43 installation 4. Unscrew and remove the two large rear bolts b and the six smaller bolts c. 5. Remove the bracket d and tighten up the six smaller bolts c. Slide out the relevant plastic spacer e. 6. Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted o...

  • Page 44: Water Supply.

    44 positioning and levelling install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubber coating. Never try to correct any unevenness in the floor by putting pieces of wood, cardboar...

  • Page 45: Position of Your Water Tap.

    45 do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap. 3. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. 4. Connect the hose to a tap with ...

  • Page 46

    Place the drain hose into your standpipe, which should have an internal diameter of approximately 38mm thus ensuring there is an air break between the drain hose and standpipe. When discharging into a standpipe ensure that the top of the standpipe is no more than 90 cm (35.4'') and no less than 60 c...

  • Page 47: Warning: This Appliance Must

    If you intend the drain hose from the machine to empty into a sink, make sure that the sink is empty and the plug hole is not blocked. Use the plastic “u -piece” supplied. In the interest of the environment washing machines and dishwashers should be connected to the foul drainage system, the water w...

  • Page 48: Important

    Important the wires in the mains lead are coloured in accor- dance with the following code: green and yellow - earth blue - neutral brown - live if you fit your own plug, the colours of the wires in the mains lead of your appli- ance may not correspond with the markings identifying the terminals in ...

  • Page 49: Country Tidy!

    49 environment concerns enviroment concerns packaging materials the materials marked with the symbol are recyclable. >pe >ps >pp this means that they can be recycled by disposing of them properly in appropriate collection containers. Old machine use authorised disposal sites for your old appliance. ...

  • Page 50: 0870 5 929 929

    Standard guarantee conditions we, aeg-electrolux , undertake that if within 12 months of the date of the pur- chase this aeg-electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same free of...

  • Page 51: Www.Serviceforce.Co.Uk

    For the address of your local service force centre and further information about service force, please visit the website at: www.Serviceforce.Co.Uk before calling out an engineer, please ensure you have read the details under the heading "something not working" when you contact the service force cen...

  • Page 52

    Www.Electrolux.Com www.Aeg-electrolux.Uk 132 966 57 1-00-052008 subject to change without notice 132966571.Qxd 21/01/2008 16.14 pagina 52 downloaded from washingmachine-manual.Com manuals.