1. DL manuals
  2. LAVAMAT
  3. Washer
  4. LS 84840
  5. User Manual

LAVAMAT LS 84840 User Manual

Summary of LS 84840

  • Page 1

    Lavamat ls 84840 en washing machine user manual downloaded from washingmachine-manual.Com manuals.

  • Page 2

    For perfect results thank you for choosing this aeg product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best fr...

  • Page 3

    Contents 4 safety information 6 product description 7 control panel 8 display 9 first use 10 personalization 11 daily use 17 washing programmes 21 helpful hints and tips 22 care and cleaning 27 what to do if… 31 technical data 31 consumption values 32 installation 36 electrical connection 37 environ...

  • Page 4

    Safety information read carefully & keep for future reference. • the safety of your appliance complies with the industry standards and with legal re- quirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. • it is most importan...

  • Page 5

    • after having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall. • if the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the...

  • Page 6

    • make sure that children or pets do not climb inside the drum. To prevent children or pets becoming trapped inside the drum the ma- chine incorporates a special feature. To acti- vate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If n...

  • Page 7

    Detergent dispenser drawer compartment for prewash phase or stain re- mover. The prewash detergent is added at the beginning of the wash programme. The stain remover is added during the stain-ac- tion phase in the main wash. Compartment for powder or liquid detergent used for main wash. Compartment ...

  • Page 8

    8 delay start button (ОТСРОЧКА СТАРТА) 9 display display 9.9 9.1 9.2 9.4 9.3 9.5 9.6 9.7 9.8 9.1 - this position shows the water temperature of the washing cycle 9.2 - this position shows the selected spin speed and the following options symbols: night cycle , rinse hold 9.3 - child safety lock symb...

  • Page 9

    Incorrect option selection if a wrong option is selected the display says that it is not selectable. Alarm codes in the event of operating problems, some alarm messages can be displayed, for example: « cannot fill water. Please check that the tap is open and then press star/pause » (see chapter «wha...

  • Page 10

    If the appliance has already been switched on once, refer to the beginning of «personaliza- tion» chapter. Personalization this appliance is provided with a settings menu that allows you to modify the factory set- tings as you want. When you switch on the machine, by turning the programme selector d...

  • Page 11

    Daily use load the laundry 1. Place the laundry in the drum, one item at a time, shaking them out as much as possible. 2. Close firmly the door. You must hear a click during closing. Warning! Do not embed the laundry between the door and the rubber joint. Measure out the detergent and the fabric sof...

  • Page 12

    You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «washing programmes»). Turn the programme selector dial to the required programme. The programme selector de- termines the type of washing cycle (e.G. Water level, drum movement...

  • Page 13

    Anyway, if an option, which is not compatible with the set washing programme or any oth- er option, is selected, the display says that is not selectable. You must select the options after you have selected the programme but before pressing the button 7. Press the button 4 to activate the option menu...

  • Page 14

    There are 2 memory spaces available for this purpose in the last 2 positions of the pro- gramme selector dial. The saved programme can be selected in the same way as any other wash programme by means of the selector dial. Saving memory: • select the desired programme and required options • press the...

  • Page 15

    By pressing this button twice, the corresponding symbol and the message «super quick» ( super quick ) will appear on the display and you will be able to reduce the cycle dura- tion. The display will show the reduced washing time. To be used only for very lightly soiled laundry. Select the start/paus...

  • Page 16

    Cancelling a programme turn the selector dial to and then in the new selected programme. Press the button 5 to cancel the programme which is running. Now press the button 7 to start the new programme. Opening the door after the programme has started first set the machine to pause by pressing the but...

  • Page 17

    Washing programmes programme - maximum and minimum - cycle de- scription - temperature - maximum fabrics load - type of laundry options 1) detergent com- partment cottons/linen 95°- cold main wash - rinses - long spin max. Load 6 kg - reduced load 3 kg maximum spin speed at 1400 rpm for white and co...

  • Page 18

    Programme - maximum and minimum - cycle de- scription - temperature - maximum fabrics load - type of laundry options 1) detergent com- partment synthetics 60° - cold main wash - rinses - short spin max. Load 3,5 kg - reduced load 2 kg maximum spin speed at 1200 rpm synthetic or mixed fabrics: underw...

  • Page 19

    Programme - maximum and minimum - cycle de- scription - temperature - maximum fabrics load - type of laundry options 1) detergent com- partment spin drain and long spin max. Load 6 kg maximum spin speed at 1400 rpm separate spin for hand washed cotton garments and after programmes with the rinse hol...

  • Page 20

    Programme - maximum and minimum - cycle de- scription - temperature - maximum fabrics load - type of laundry options 1) detergent com- partment outdoor sports 40° - cold main wash - rinses - short spin max. Load 3 kg maximum spin speed at 800 rpm special programme for sport clothes. By selecting thi...

  • Page 21

    Helpful hints and tips sorting out the laundry follow the wash code symbols on each garment label and the manufacturer’s washing in- structions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Before loading the laundry never wash whites and coloureds together. White...

  • Page 22

    The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling. All commonly available washing machine detergents may be used in this appliance: • powder detergents for all types of fabric • powder detergents for ...

  • Page 23

    Maintenance wash with the use of low temperature washes it is possible to get a build up of residues inside the drum. We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash: • the drum should be empty of laundry. • select the hottest cotton wash programme. • ...

  • Page 24

    Programme: short cotton programme at maximum temperature and add approx. 1/4 measuring cup of detergent. Door seal check from time to time the door seal and objects that could be trapped in the fold. Drain pump the pump should be inspected regularly and particularly if: • the appliance does not empt...

  • Page 25

    7. When no more water comes out, un- screw the pump cover by turning it an- ti-clockwise and remove the filter. Use pliers, if necessary. Always keep a rag nearby to dry up any water spillages when removing the cover. Clean the filter under a tap, to remove any traces of fluff. 8. Remove foreign bod...

  • Page 26

    Cleaning the water inlet filters if the appliance doesn't fill, it takes a long time to fill with water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter "what to do if..." for more details), check if the water inlet filters are blocked . To clean...

  • Page 27

    Emergency emptying out if the water is not discharged, proceed as follows to empty out the machine: 1. Pull out the plug from the power socket; 2. Close the water tap; 3. If necessary, wait until the water has cooled down; 4. Open the pump door; 5. Place a bowl on the floor and place the end of the ...

  • Page 28

    • door open: « please check that the door is closed properly and then press start/ pause ». • anti-flooding system has activated:« anti-flooding system has been activated. Please check inlet/drain pipe connections ». Once the problem has been eliminated, press the button 7 to restart the programme. ...

  • Page 29

    Problem possible cause/solution the machine does not empty and/or does not spin: the drain hose is squashed or kinked. « cannot drain the water. Please check that the filter is clean and then press button start/pause ». • check the drain hose connection. The drain filter is clogged. « cannot drain t...

  • Page 30

    Problem possible cause/solution the door will not open: the programme is still running. • wait the end of washing cycle. There is water in the drum. • select drain or spin programme to empty out the water. For opening the door refer to display mes- sage. The machine vibrates or is noisy: the transit...

  • Page 31

    If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and pur- chase date of your machine: the service centre will require this information. Technical data dimensions width / height / depth 60 / 85 / 63 mm electric...

  • Page 32

    The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. Installation unpacking all transit bolts and packing must be removed before using the appliance...

  • Page 33

    3. Unscrew the three bolts with the key supplied with the appliance. 4. Slide out the relevant plastic spacers. 5. Fill the smaller upper hole and the two large ones with the corresponding plas- tic plug caps supplied in the bag con- taining the instruction booklet. Installation 33 downloaded from w...

  • Page 34

    Positioning and levelling install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubber coating. Never try to correct any unevenness in the floor by putting pieces of wood, cardboard o...

  • Page 35

    3. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. 4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance. The inlet hose must not be lengthened. If it is too short a...

  • Page 36

    This could be done by tying it to the tap with a piece of string or attaching it to the wall. 2. In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. 3. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 ...

  • Page 37

    Warning! Should the appliance power supply cable need to be replaced, this must be carried out by a service centre. Environment concerns the symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate coll...

  • Page 38

    38 downloaded from washingmachine-manual.Com manuals.

  • Page 39

    39 downloaded from washingmachine-manual.Com manuals.

  • Page 40

    Www.Aeg.Com/shop 132957921-a-202011 downloaded from washingmachine-manual.Com manuals.