Summary of Javelin Pro
Page 1
Q u a l i t y t h e r m o m e t e r s c a l i f o r n i a u s a p r o jav eli n.
Page 2
01 02 05 06 04 03 your javelin pro.
Page 4
Stabilization alert insert the probe into your food and hold the icon. The word hold will start blinking and after a few seconds, a double chime will sound when the temperature has stabilized. The stabilized temperature remain on the display as long as you are holding the icon. Release your finger t...
Page 5
Max/min double tap the icon to display the maximum temperature for current session. Tap again for the minimum temperature. To exit, tap again. Hold the icon during max/min to clear values..
Page 6
Power saver hold the icon to enable power saving mode. This will disable the backlight and reduce power consumption. Press and hold the icon again to exit this feature..
Page 7
Changing the battery when the display shows “error” and the icon, it’s time to switch out your battery. Fully retract the probe and twist open the battery door with a coin. Carefully remove existing battery and insert a new cr2032 with the positive (+) pole up. Model: p x1 la v a tools. Calif ornia ...
Page 8
Additional information sleep mode if left on and idle for more than 60 minutes, the javelin pro will automatically go to sleep. Simply tap the touch pad to wake the device. Antifog display the display is coated in a hydrophobic agent to keep the readout fog-free even when measuring steaming liquids....
Page 9
Magnetic backing the javelin pro has a built-in magnetic backing to allow for convenient storage. Magnetic backing may not work on stainless steel surfaces. Antimicrobial coating silver-based antimicrobial additive is impregnated into the plastic shell to inhibit the growth of pathogens. Efficacy is...
Page 10
Personalization personalize your javelin pro using switches found inside the battery bay. You can disable and re-enable various functions by toggling their respective switches. You must turn off the device to have these changes apply. Toggle c°/ f° toggle auto-off toggle stabilization alert.
Page 11
Accuracy test to check the accuracy of your javelin pro, we recommend using an ice bath test. To create an iced bath, fully pack a large cup with crushed ice. Next, fill 3/4 of the cup with purified water. Let the slurry sit for a brief moment and give it a quick stir to allow the temperature to equ...
Page 12
Won’t switch on retract and extend probe or change battery no backlight ensure battery saving mode is disabled displaying “error” battery is running low, change batteries change c°/ f° use switch 1 to switch between c°/ f° (see page 10) troubleshooting.
Page 13
Device asleep tap on touch pad to wake device restore factory settings turn off device and position all personalization switches downwards don’t hear double chime make sure to hold the touch pad long enough “hold” doesn’t blink use switch 3 to activate stabilization alert (see page 10).
Page 14
Use & maintenance • do not insert the probe all the way to the plastic collar • always measure at the center of the meat, avoid hitting bone or hard cartilage • prevent bacterial growth by wiping down the probe after each use • clean the body with soft damp cloth. Do not use solvents or scouring age...
Page 15
Safety warning • never leave the device in the oven • never place probe directly over fire • never immerse the device in liquid for any period of time • keep the device and battery out of reach of children • do not subject the device to extreme temperature, vibration, or shock • batteries must not b...
Page 16
Lavatools.Co come visit us for more info v1.1.