Summary of Digital Video Recorder
Page 1
Digital video recorder quick operation guide.
Page 2: Dvr Pre-Installation
Quick operation guide of digital video recorder 1 congratulations on purchasing a laview product. This manual may vary by model including model number, number of channels, cameras, configuration, and hard drive capacity. Dvr pre-installation this series dvr is highly advanced surveillance equipment ...
Page 3
Quick operation guide of digital video recorder 2 3. Connect the power cable to the hdd. 4. Place the hdd on the bottom of the device and then fasten the screws on the bottom to fix the hdd. 5. Re-install the cover of the dvr and fasten screws..
Page 4: Front Panels
Quick operation guide of digital video recorder 3 front panels front panel of 8ch series description of control panel buttons no. Name function description 1 power power indicator turns yellow once the power switch turns on. Ready ready indicator turns yellow when system is running. Status status in...
Page 5
Quick operation guide of digital video recorder 4 6/mno/play enter numeral “6”; enter letters “mno”; playback, for direct access to all-day playback interface. 7/pqrs/rec enter numeral “7”; enter letters “pqrs”; open the manual record interface. 8/tuv/ptz enter numeral “8”; enter letters “tuv”; acce...
Page 6
Quick operation guide of digital video recorder 5 no. Name function description with the address from 1~254; indicator turns red when the shift button is used; indicator does not light when the dvr is controlled by a keyboard or by the ir remote control with the address of 255; indicator turns green...
Page 7
Quick operation guide of digital video recorder 6 no. Name function description enter letters “tuv”; access ptz control interface. 9/wxyz/prev enter numeral “9”; enter letters “wxyz”; multi-channel display in live view. 0/a enter numeral “0”; shift the input methods in the editing text field. (upper...
Page 8: Rear Panels
Quick operation guide of digital video recorder 7 rear panels hds 8 channel back panel no. Item description 1 video in hd-sdi interface for video input. 2 audio in rca connector 3 audio out rca connector 4 vga db9 connector for vga output. Display local video output and menu. 5 hdmi hdmi video outpu...
Page 9
Quick operation guide of digital video recorder 8 connector for alarm output. 10 power supply ac 100 ~ 240v power supply. 11 power switch switch for turning on/off the device. 12 gnd ground 13 line in bnc connector for audio input. 14 esata connects external sata hdd, cd/dvd-rm. 15 rs-232 interface ...
Page 10: Peripheral Connections
Quick operation guide of digital video recorder 9 peripheral connections rs-485 connection to connect rs-485 devices to the dvr: 1. Disconnect pluggable block from the rs-485 terminal block. 2. Press and hold the orange part of the pluggable block; insert signal cables into slots and release the ora...
Page 11: Specifications
Quick operation guide of digital video recorder 10 specifications table 1 specification for 8ch series model video/audio input video compression h.264 hd-sdi video input 8-ch hd-sdi interface (800 mvp- p, 75 Ω) supported hd-sdi camera types 1080i60, 1080i50, 1080p30, 1080p25, 720p60, 720p50, 720p30,...
Page 12
Quick operation guide of digital video recorder 11 table 2 specification for 16ch usb port 2 × usb2.0 alarm in / out 4 / 1 (optional) general power supply 12v dc consumption (without hard disks) max. 20 w working temperature -10 ºc ~ +55 ºc (14 ºf ~ 131 ºf) working humidity 10% ~ 90% chassis 19-inch...
Page 13
Quick operation guide of digital video recorder 12 management network protocols tcp/ip, pppoe, dhcp, dns, ddns, ntp, sadp, smtp, snmp, nfs, iscsi, upnp™ hard disk type 4 sata interfaces for 4 hdds; 1 esata interface capacity up to 4 tb capacity for each disk external interface network interface 1; 1...
Page 14
Quick operation guide of digital video recorder 13 hdd storage calculation chart the following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit rate storage used 96k 42m 128k 56m 160k 70m 192k 84m 224k 98m 256k 112m 320k 140m 384k...
Page 15: Menu Operation
Quick operation guide of digital video recorder 14 menu operation menu structure the menu structure of the 8ch sdi dvr is shown below: the menu structure of the 16ch dvr is shown below: startup and shutdown proper startup and shutdown procedures are crucial to expand the service time of the dvr. To ...
Page 16
Quick operation guide of digital video recorder 15 power indicator led on the front panel should be yellow. To shut down the dvr: 1. Enter the shutdown menu. Menu > shutdown 2. Select the shutdown button. 3. Click the yes button. 4. Turn off the power switch on the rear panel when the note appears (...
Page 17
Quick operation guide of digital video recorder 16 2. Click the start recording submenu and select the recording mode to normal record or motion detection record. 3. In the pop-up message box, click yes to finish the quick recording settings for all channels. Note: the full-screen motion detection t...
Page 18
Quick operation guide of digital video recorder 17 front panel: press play button to play back record files of the channel under single-screen live view. Under multi-screen live view, record files of the top left channel (not masked) will be played back. Note: pressing numerical buttons will switch ...
Page 19
Quick operation guide of digital video recorder 18 3. Check backup result. Choose the record file in export interface and click button to check it..