1. DL manuals
  2. Lavina
  3. Floor Machine
  4. 30G-S
  5. User Manual

Lavina 30G-S User Manual

Summary of 30G-S

  • Page 2: Warranty Card

    Warranty card a warranty card must be submitted to superabrasive within 30 days of purchase in order for the foregoing warranty to apply. See next page for more details on lavina warranty and return policies. Print and mail this form. Or fill out and submit our online warranty form customer informat...

  • Page 3

    Warranty and returns warranty policy for lavina® s machine s a warranty card must be submitted to superabrasive within 30 days of purchase in order for the foregoing warranty to apply. You can either mail a hard copy of the warranty card or submit it electronically - see page 2 . Superabrasive warra...

  • Page 4

    Superabrasive owner’s manual – lavina® 30g ‐ s 6/2014 2 1. General information preface 3 manufacturer 3 general description 3 machine characteristics 3 lavina® 30g ‐ s main design 3 environmental conditions 4 vacuum connection 4 technical data 4 vibrations 4 sonorous emissions 4 label data 4 custome...

  • Page 5

    Superabrasive owner’s manual – lavina® 30g ‐ s 6/2014 3 1. General information this owner’s manual is intended for the operator of the lavina® s machine, the servicing technician as well as for anyone involved with operating or servicing the machine. We recommend that you read the instructions very ...

  • Page 6

    Superabrasive owner’s manual – lavina® 30g ‐ s 6/2014 4 environmental conditions the temperature range for operating the lavina® s machine outdoors is between 41°f and 86°f or 5°c and 30°c. Never use the lavina® s machine during rain or snow when working outdoors. When working indoors, always operat...

  • Page 7

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 5 - in areas where loose tiles or other objects are preventing proper use of the machine. - in rooms without proper ventilation preparation for work make sure that: you have closed the work area, so that no person unfamiliar with ope...

  • Page 8

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 6 5. Have the machine and cylinder inspected before using them again local agencies and regulations nfpa operating a propane powered floor care machine requires compliance with certain safety regulations. The national fire protection...

  • Page 9

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 7 life of 30 days, depending on the concentration of contaminants, humidity, and temperature. Testing there are a great number of instruments offered on the market to test for toxic gases. Only those designed to read carbon monoxide ...

  • Page 10

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 8 figure 3.2.2 figure 3.4a figure 3.3 figure 3.4b figure 3.1 figure 3.2 figure 3.2.1 propane changes into a gas, is ‐ 44 o f ( ‐ 42 o c). Exposing unprotected skin to propane gas or liquid could result in frostbite injury. All new cy...

  • Page 11

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 9 lifting the machine from working to tool mounting position push the front handle down and swivel it to the front (fig. 3.5). Pull the handle up and ensure the head is a stable upright position, for mounting/dismounting the tool. En...

  • Page 12

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 10 4. Operation preliminary controls inspect the working area as explained in the safety instructions. For wet use, fill in the water tank or connect the vacuum extractor and ensure that the vacuum hose is clear and it will follow th...

  • Page 13

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 11 control board the control board 1 start/stop engine switch turn key to the right for contact full right for starting the engine, to stop key to left full left is contact 2 start/stop clutch start will electronically activate the g...

  • Page 14

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 12 5. Tools and accessories weights superabrasive offers additional weights for increasing the productivity of the machine (fig.5.1). Each additional weight weighs about 64 lbs or 29 kg. Each individual application, type and conditio...

  • Page 15

    10 6. Popular tools recommended tools quickchange system and tooling feature extremely fast and convenient tool changes, and a long tool life, providing for great long ‐ term cost savings. The quickchange pads are produced in four different bonds for super hard, hard, medium and soft concrete, in a ...

  • Page 16

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 14 7. Exploded view lavina® 30g ‐ s general exploded view (fig.7.1) lavina® 30g ‐ s top cover exploded view 1 (fig.7.2) lavina® 30g ‐ s planetary drive exploded view (fig.7.3) lavina® 30g ‐ s top cover exploded view 2 (fig.7.4) figur...

  • Page 17

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 15 lavina® 30g ‐ s bottom cover exploded view 1 (fig.7.5) lavina® 30g ‐ s bottom cover exploded view 2 (fig.7.6) lavina® 30g ‐ s carriage exploded view (fig.7.7) lavina® 30g ‐ s tool holder exploded view (fig.7.8) figure 7.6 figure 7...

  • Page 18

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 16 8.Maintenance and inspection remark tampering w/emission control system prohibited federal law and california state law prohibits the following acts or the causing thereof: (1) the removal or rendering inoperative by any person ot...

  • Page 19

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 17 check and replace every 50 working hours change engine oil, while changing check for leakage of engine oil at the various seals. The hour meter will blink between 48 ‐ 52 hours as a reminder. /"engine oil capacity" is 1.5l(1.6us.Q...

  • Page 20

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 18 9. Troubleshooting 9.1 engine when troubles occur, be sure to check the simple causes which at first, may seem too obvious to be considered. For example, a starting problem could be caused by fuel starvation due to an empty propan...

  • Page 21

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 19 pull the connector of the battery (fig. 9.3.1), pull out the propane hose (fig. 9.3.2), the connectors of the lamp (fig. 9.3.3), dismount the control panel (fig. 9.3.4), and take off all water and vacuum hoses (fig. 9.3.5). Remove...

  • Page 22

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 20 9.5 replacing the clutch in case the electric clutch has to be replaced, remove the engine (see previous chapter) and lay it on its side with the oil drainage up (fig. 9.5.1). Remove the motor base plate (fig. 9.5.2) and loosen th...

  • Page 23

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 21 figure 9.6.7 figure 9.6.8 figure 9.6.9 figure 9.6.10 when the tool holder is dismounted, you can change the sealers (v ‐ ring and felt ‐ ring). Take out felt ‐ ring, adaptor and v ‐ ring. Before mounting check on which side the ad...

  • Page 24

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 22 9.9 mounting and tensioning a new planetary belt completely dismount the tensioning device (fig. 9.9.1). Make 2 signs on the dismounted belt exactly 10 cm out of each other (belt without tension) (fig. 9.9.2). The purpose is to me...

  • Page 25

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 23 open the checking cover to reach the belt and tension device (fig. 9.10.1). While tensioning check regularly tension. Push the belt down and with a pressure of 71n. This is approximately 7 kilograms or 15 pounds with this pressure...

  • Page 26

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 24 dismounting the driving pulley: take the top screw out to release the bushing (fig.9.11.1), push the bushing together with the washer up (fig.9.11.2), push washer down of the bushing (fig.9.11.3)., take bushing out (fig.9.11.4), p...

  • Page 27

    Warranty and returns warranty policy for lavina® s machine s a warranty card must be submitted to superabrasive within 30 days of purchase in order for the foregoing warranty to apply. You can either mail a hard copy of the warranty card or submit it electronically - see page 2 . Superabrasive warra...

  • Page 28

    Superabrasive owner’s manual – lavina® 30g ‐ s 6/2014 26 13. Spare parts assembly and parts specifications 13.1 lavina® 30g ‐ s general parts / for machine s produced before jan. 1, 2014/ model no. Item no. Description pcs. L30g-s 1 l30-05.00.00.00 guard assembly 1 l30g-s 2 l30gs-10.00.00 main head ...

  • Page 29

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 27 13.2 lavina® 30g ‐ s top cover 1 parts / for machine s produced before jan. 1, 2014/ model no. Item no. Description pcs. L30g-s 1 l25gs-19.00.00 top cover assembly 1 l30g-s 2 m6x10iso7380f screw 14 l30g-s 3 l25nsps-07.00.00.05 bac...

  • Page 30

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 28 * while dismounting the clutch use one clutch washer with item no l25g-s-10.02.06, instead of previously mounted two washers with item no w1220. 13.3 lavina® 30g ‐ s engine base parts model no. Item no. Description pcs. L30g-s 1 f...

  • Page 31

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 29 13.5 lavina® 30g ‐ s planetary drive parts model no. Item no. Description pcs. L30g-s 1 l25g-10.00.57 shaft 1 l30g-s 2 a52 din472 retaining ring 1 l30g-s 3 3205 roller assembly 1 l30g-s 4 m6x16din7991 screw 7 l30g-s 5 l25l-10.00.2...

  • Page 32

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 30 13.7 lavina® 30g ‐ s bottom cover 1 parts model no. Item no. Description pcs. L30g-s 1 l25ls-14.00.00 bottom cover assembly 1 l30g-s 2 m5x12din6921 bolt 12 l30g-s 3 l25ls-14.00.05 sealer inspection cover 1 l30g-s 4 l25l-10.00.09 i...

  • Page 33

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 31 13.9 lavina® 30g ‐ s bottom cover 2 parts model no. Item no. Description pcs. No. Item no. Description pcs. L30g-s 1 l25l-12.00.00 tensioning support 1 13 l25l-10.00.12 sector 1 l30g-s 2 l25l-10.00.16 sector 1 14 l25l-10.00.07 sup...

  • Page 34

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 32 13.11 lavina® 30g ‐ s carriage parts / for machines produced before jan.1, 2014/ model no. Item no. Description pcs. No. Item no. Description pcs. L30g-s 1 l25gs-21.00.00 frame 1 16 m5din985 nut 4 l30g-s 2 l25g-23.00.00 handle ass...

  • Page 35

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 33 13.11 lavina® 30g ‐ s carriage parts / for machine s produced after jan.1, 201 4 / model no. Item no. Description pcs. No. Item no. Description pcs. L30g-s 1 l25gs-21.00.00-01 frame 1 17 m5x20din933 bolt 4 l30g-s 2 l25-s-23.10.00 ...

  • Page 36

    Superabrasive user manual original language lavina® 30g ‐ s 6/2014 34 13.12 lavina® 30g ‐ s engine parts model no. Item no. Description pcs. L30g-s 1 w3132 kawasaki fs481v-as10-m 18h 12v 1 l30g-s k49065-7007 oil filter 12 l30g-s 2 w1325 oil pressure switch 6 l30g-s 3 f466230 elbow 1 l30g-s 4 k59071-...