Lawia Bronco Owner's Manual - page 10
Before operating your scooter, check the following:
•
Free-wheeling device in the Engage position on the Bronco.
•
Forward / Reverse switch is in the correct position.
•
Speed knob adjustable switch is in the preferable location.
1. Sit on scooter and turn on key. The Indicator light should be green.
2. When your hands rest comfortably on the handlebars, the twist
control should be within easy reach. Twisting towards the operator in
the seat moves the scooter. When you release both levers the
scooter will slow to a stop unless it is on an incline.
3. The scooter has a regenerative braking system. This means that
when the throttle is wound back the scooter generates electricity into
the batteries slowing it down. The operator should practice this
braking method which will be suitable for most operational
applications. The hand brake should only be used for
emergencies and when stopped for parking.
4. Steer the scooter by turning the whole steering column the way you
want to go.
5. Practice driving where there are no obstacles. Start at the slowest
speed and drive forward and backward; make some turns. As you
get more comfortable you can use high speed.
6. If the Battery Indicator changes to yellow you should plan to recharge
the batteries very soon.
7. If the scooter stops, reset the key and try again. In some cases when
used under heavy loads and high temperatures the scooter may not
go again until the control unit has cooled down. This is because
when the scooter is turned ON the control unit checks all the
parameters and if still hot will not operate until cooled. This may take
several minutes. This can be avoided by not turning the scooter off
when stopping when playing. Ie the control unit does not reset and
therefore will not stop. Caution should be taken with this type of
operation.
10