Summary of GM-GV3
Page 1
Mobilecam 1 gm-gv3 mobilecam & viewer software user guide.
Page 2: Table Of Contents
Mobilecam 2 table of contents chapter 1 gm-gv3 mobilecam overview 1.1 package contents……………………………………………. 1.2 gm-gv3 overview..………………………………… 1.3 mobilecam peripheral connection diagram……….. Chapter 2 install the program & setup the mobilecam. 2.1 step 1. Connect the mobilecam to pc with usb cable. 2....
Page 3
Mobilecam 3 chapter 1 mobilecam overview 1.1 package contents 1.2 gm-gv3 overview.
Page 4
Mobilecam 4 1. Record key : 2. Power key : power on/off - press more than 3 seconds. Sos emergency - press less than 3 seconds. 3. Sos on/off: sos emergency function on/off 4. Micro sd slot 5. Dc +5v input 6. Fan 7. Antenna 8. Video & audio input 9. Control port : remote and gps connection./ usb con...
Page 5
Mobilecam 5 1.3 mobilecam connection diagram chapter 2 install the program & setup the mobilecam. 2.1 step 1. Connect the mobilecam to pc with usb cable. ★ insert the sim card and micro sd card properly. ★ slide the battery pack in to position then lock the battery..
Page 6
Mobilecam 6 ★ attach the antenna and connect gm-gv3 to pc with usb cable then power on the mobilecam. If battery is low, use the ac adaptor for power. Supply. ★ please click “cancel” if the dialog shows as below on pc screen after mobilecam boot up. Power on.
Page 7
Mobilecam 7 2.2 step 2. Software installation ★ wait for the gm-gv3 blue led to stop flashing. Run mobilecam.Exe please disable your antivius software before starting install , vista/win7 os please "run as administrator" click “next” icon to start the installation please keep gm-gv3 connected to pc ...
Page 8
Mobilecam 8 ★ shortcut path setup. Use default path or click “browse” icon to change the path then click “next” icon. ★ shortcut setup. Select to create the windows desktop icon then click the “next” icon. ★ installation information. Click “install” to start the program installation. ★ click the “fi...
Page 9
Mobilecam 9 2.3 step 3 . Driver installation ★ click the “next” icon to start the mobilecam setup procedure. ★ wait for driver installation . ★ click the “continue” icon .If you see the dialogue screen below..
Page 10
Mobilecam 10 ★ driver installation success. Click the “next” icon to create the user account. 2.4 step 4 . Create user account. ★ click the “confirm” icon after entering the information below. U sername (5~15 characters). Note : upper and lower case insensitive password : (5~15 characters). Note : u...
Page 11
Mobilecam 11 ★ dialog shows device name success. Click the “cancel” icon to setup the mobilecam network. 2.5 step 5. Setup the mobilecam network. ★ enter the apn , username (if required) and password (if required), provided by your isp provider, then click the “next” icon..
Page 12
Mobilecam 12 ★ wait for dial up to the mobile network. ★ when the ip address is assigned, mobilecam network connection will show success then click the “ok” icon to launch the mobilecam viewer. 2.6 step 6. View the online mobilecam ★ enter the username & password you created in step 4 above then cli...
Page 13
Mobilecam 13 ★ mobilecam device status will show on the list. Double click the online device to view video from that device. Chapter 3 mobilecam viewer overview 3.1 icon and status bar for device (mobilecam) side.
Page 14
Mobilecam 14 3.2 icon and status bar for remote (pc) side. 3.3 device setting : click “ setting ” icon note : click “save” after setting or “reset” to restore the factory setting. Basic configuration.
Page 15
Mobilecam 15 status video factory default setting is optimized. Please do not make changes unless you are sure of the settings procedure. Audio factory default setting is optimized. Date please set the time zone to correct area.
Page 16
Mobilecam 16 . Advance configuration maintenance restart : reset the gm-gv3 default : reset and restore the factory default setting. Firmware upgrade : use mobile network to update firmware. Please use usb connection to update the firmware. Smtp smtp : device will send turn on message. Emergency sms...
Page 17
Mobilecam 17 3g mobile network setting : apn, user name & password setting, server switch : worldwide. Region : select northern american if user in north america. Record configuration record file :.
Page 18
Mobilecam 18 get time list : click “get time list”. The recorded files stored on the sd card will show in the list. Get record clip : click the start and stop time and modify the time region then click the “get video clip” icon.. The clip file will list on file name window after download is complete...
Page 19
Mobilecam 19 record file save path. 3.4 device list click “ device ” icon. All the device registrations under your account will be listed. Double click the online device to start connection. 3.5 map click the “ map ” icon. Map will show on the right side of screen..
Page 20
Mobilecam 20 chapter 4 account maintenance 4.1 forgot password step 1. Run the mobilecam viewer program step 2. Click the “ forgot password ” icon. Step 3. Enter any one of your device’s imei that you already added under your account and e-mail then click “ ok ”. System will send the password to you...
Page 21
Mobilecam 21 4.2 change password and e-mail step 1. Run the mobilecam viewer program. Enter the username and password to start the program. Step 2. C lick the “ mobilecam ” icon on the left top of the program then click “ account ” icon step 3. Enter the username and password then click “ login ” ic...
Page 22
Mobilecam 22 step 4. Modify your password and email on the account maintenance page then click the “ confirm ” icon. Note: user name can not be modified. 4.3 add, rename, delete, or share device delete device : click “ del ” icon to delete the device. Add device : enter the device name and imei then...
Page 23
Mobilecam 23 step2. Rename the device name then click “ update ” icon. Share device: step1. Click the ‘ share ” icon and the dialog box will show as below. Step2. Enter the username to whom you want to share this mobilecam then click “ add ” icon . 4.4 create account on mobilecam viewer make sure pc...
Page 24
Mobilecam 24 step 3. 1. User name : enter username (1~15 characters). Note : upper and lower case insensitive 2. Password : enter password (1~15 characters). Note : upper and lower case sensitive . 3. Confirm : enter the password for confirmation. 4. E-mail : enter the email address for forgotten pa...
Page 25
Mobilecam 25 chapter 5 setup gm-gv3 with usb connection 5.1 set up gm-gv3 with usb please keep gm-gv3 connected to pc with usb cable. Step 1. Click “ usb link ” icon step 1. Click “ ok ” icon.
Page 26
Mobilecam 26 step 3. Please refer 3.3 device setting to setup the gm-gv3 5.2 quick mobile network setup please keep gm-gv3 connected to pc with usb cable. Step 1. Click “ usb link ” icon step 3. Enter the apn , user name , & password and click “apn change” icon then click “ok” icon. Apn , user name ...
Page 27
Mobilecam 27 gm-gv3 mobilecam specification 6.1 gm-gv3 specification item description min. Typ. Max. Unit dc in voltage dc 4.5 5 5.5 v operating current full run 1.3 a operating time continuous operation 1.5 hr battery type lithium 2200 mah 3.7 v antenna 5 band 800/900/1700/1900/2100 network wcdma 3...
Page 28
Mobilecam 28 memory type micro sd 32 g gps sensitivity tracking acquisition -165 -148 dbm gps fix time cold start warm start hot start (autonomous) 35 34 1.5 sec. Camera input Φ 2.5 phone jack control port mini hdmi operating temperature 0 50 ℃ storage temperature -40 80 ℃ operating humidity 5 95 % ...