Lawn-Boy 10272 Operator's Manual

Manual is about: Silver Series

Summary of 10272

  • Page 1

    2003—lawn-boy, inc. 8111 lyndale ave., bloomington, mn 55420, usa printed in the usa all rights reserved original instructions (en) register your product at www.Lawn-boy.Com silver series lawn mower model no. 10272—serial no. 240000001 and up model no. 10367—serial no. 240000001 and up form no. 3350...

  • Page 2: Slope Operation

    2 3350-614 rev a • only allow responsible individuals, who are familiar with the instructions, to operate the mower. • clear the area of objects such as rocks, toys, wire, bones, sticks etc., which could be picked up and thrown by the blade. • be sure the area is clear of other people before mowing....

  • Page 3: Safety/instruction Decals

    3 3350-614 rev a • never tamper with safety devices. Check their proper operation regularly. • keep mower free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage. Allow mower to cool before storing. • stop and inspect the equipment if you strike an object. Repair, if necessary...

  • Page 4: Product Overview

    4 3350-614 rev a product overview 6 1 3 2 7 8 9 5 m-6584a 4 1. Cutting height lever 2. Oil fill/dipstick 3. Recoil start handle 4. Self-propel drive bar (self-propel model only) 5. Blade control bar 6. Fuel tank cap 7. Air filter 8. Primer 9. Spark plug 10. Rear grass bag (self-propel model only) se...

  • Page 5: Filling The Engine With Oil

    5 3350-614 rev a filling the engine with oil your mower does not come with oil in the engine, but it does come with a 20 oz. (0.59 l) bottle of oil. Max. Fill: 20 oz., type: sae 30w detergent oil with an api service classification of sf, sg, sh, or sj. 1. Remove the dipstick. M-6588 m-6587 2. Slowly...

  • Page 6: Filling The Fuel Tank

    6 3350-614 rev a filling the fuel tank fill the fuel tank with fresh unleaded regular gasoline from a major name-brand service station. Important: to reduce starting problems next season, add fuel stabilizer to the fuel all season, mixing it with gasoline less than 30 days old. 1/2 in. (1 cm) m-5570...

  • Page 7: Adjusting The Handle Height

    7 3350-614 rev a adjusting the handle height squeeze the bottom of the handle halves together (as shown) and change the handle holes in which the pins (a) are mounted, as follows: • raise the handle using hole (b). • lower the handle using hole (c). M-5612 m-5614 a b c operation starting the engine ...

  • Page 8: Stopping The Engine

    8 3350-614 rev a stopping the engine to stop the engine, release the blade control bar. Important: when you release the blade control bar, both the engine and blade should stop within 3 seconds. If they do not stop properly, stop using your mower immediately and contact your authorized service deale...

  • Page 9: Installing The Cover Plate

    9 3350-614 rev a installing the cover plate to convert from mulching to side discharging, remove the mulch plate and install the cover plate. Warning an uncovered discharge opening could allow the lawn mower to throw objects in the operator’s or bystander’s direction and result in a serious injury. ...

  • Page 10

    10 3350-614 rev a 7. Secure the chute with the wing screw (a). 1013 a 8. Check the clearance between the blade tips and the baffle and ensure that there is no contact. Important: the baffle (a) must go behind the front housing baffle (b) and between the blade and the toe guard (c) to prevent it from...

  • Page 11: Operating Tips

    11 3350-614 rev a operating tips • clear the area of sticks, stones, wire, branches, and other debris that the blade could hit. • avoid striking solid objects with the blade. Never deliberately mow over any object. • if the mower strikes an object or starts to vibrate, immediately stop the engine, d...

  • Page 12: Maintenance

    12 3350-614 rev a maintenance note: determine the left and right sides of the mower by standing in the operating position. Recommended maintenance schedule important: refer to your engine operator’s manual for additional maintenance procedures. Maintenance service interval maintenance procedure each...

  • Page 13: Preparing For Maintenance

    13 3350-614 rev a preparing for maintenance 1. Stop the engine and wait for all moving parts to stop. 2. Disconnect the spark plug wire from the spark plug and hook it onto the retaining post (a) before performing any maintenance procedure. M-5589a a 3. After performing the maintenance procedure(s),...

  • Page 14: Replacing The Blade

    14 3350-614 rev a replacing the blade important: you will need a torque wrench to install the blade properly. If you do not have a torque wrench or are uncomfortable performing this procedure, contact an authorized service dealer. Examine the blade whenever you run out of gasoline. If the blade is d...

  • Page 15: Folding The Handle

    15 3350-614 rev a folding the handle warning folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition. Do not damage the cables when folding or unfolding the handle. If a cable is damaged, contact an authorized service dealer. 1. Loosen the handle knobs...

  • Page 16

    Silver series wpm silverpro series wpm commercial wpm the lawn-boy no-worry warranty a two-year full warranty (limited warranty for commercial use) conditions and products covered for a period of two years from the date of purchase, lawn-boy and its affiliate, lawn-boy warranty company, pursuant to ...