Lawn-Boy 51626 Operator's Manual - Removing Clogged Debris
DANGER
Normal usage of the bag causes it to wear and
deteriorate over time. A worn or deteriorated bag
allows small objects to be thrown through the bag,
possibly injuring you or bystanders.
Check the bag frequently. If it is worn or
deteriorated, replace it with a genuine Lawn-Boy
vacuum bag.
Separating the Vacuum Tube
g227719
Removing Clogged Debris
from the Impeller
1.
Turn off and unplug the appliance from the power source
and wait for all moving parts to stop.
2.
Remove the vacuum tube then remove the debris from
impeller blades.
g227760
3.
Check the impeller for any signs of damage. If it is damaged,
contact your Authorized Service Dealer.
4.
Install the vacuum tube, or, if you want to switch to blower
mode, the bottom inlet cover. Refer to
Converting from
Blower to Vacuum (page 3)
or
Converting from Vacuum to
Blower (page 3)
for more information.
Service
Lawn-Boy has designed this product to give you years of trouble
free use. Should it need service, bring the product to your
Authorized Service Dealer.
Double-insulated
Appliances
In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means is
provided on a double-insulated appliance, nor should a means for
grounding be added to the appliance. Servicing a double-insulated
appliance requires extreme care and knowledge of the system,
and should be done only by the qualified service personnel at
your Authorized Lawn-Boy Service Dealer. Replacement parts for
a double-insulated appliance must be identical to the parts they
replace. A double-insulated appliance is marked with the words
“Double Insulation” or “Double Insulated.” The symbol (square
within a square)
may also be marked on the appliance.
Storage
Store the appliance and extension cord indoors, in a cool dry
location, out of reach of children and animals.
Troubleshooting
If your blower fails to run when you turn it on, check the following
before contacting your Authorized Service Dealer:
•
Ensure that the bottom inlet cover or vacuum tube is locked in
place.
•
Ensure that the power cord is secured in place at the back of
the appliance and that the plug is fully seated.
6