Lawn-Boy SilverPro Series Operator's Manual - page 4
4
feet away from the mower housing and cutter blade
when the engine is running. Stay behind the handle
until the engine stops.
•
Since the blade rotates for a few seconds after the
blade control bail is released, stay behind the handle
until all movement stops.
•
After striking a foreign object or if mower vibrates
abnormally, stop the engine and remove the wire from
the spark plug. Check the mower for damage and
make all repairs before using it again.
•
Stop the engine before adjusting the height–of–cut.
•
Stop the blade/engine when crossing a gravel
driveway, road, or sidewalk.
•
Stop the engine before leaving the operator’s
position–behind the handle. Disconnect the wire from
the spark plug if the mower will be unattended.
•
Do not touch the engine while it is running or shortly
after it is stopped because it will be hot enough to
cause a burn.
Maintenance
•
Perform only those maintenance instructions described
in this manual. If major repairs are ever needed or if
assistance is desired, contact your local Authorized
Lawn–Boy Service Dealer.
•
Before the mower is cleaned, inspected, serviced, or
adjusted, stop the engine and disconnect the wire from
the spark plug. Keep the wire away from the plug to
prevent accidental starting.
•
To ensure that the mower is in safe operating
condition, frequently check and keep all nuts, bolts,
and screws tight. Ensure that the blade nut/screw is
tightened to 63 N
m (47 ft.–lbs.).
•
To reduce fire hazard, keep the engine free of
excessive grease, grass, leaves, and accumulations of
dirt.
•
Allow the engine to cool before storing the mower in
any enclosure. Do not store the mower near any open
flame or where gasoline fumes may be ignited by a
spark.
•
Do not overspeed the engine by changing governor
settings.
•
At the time of manufacture, the mower conformed to
the safety standards in effect for rotary mowers. To
ensure best performance and continued safety
certification of the mower, use genuine Lawn–Boy
replacement parts and accessories.
Safety and Instruction Decals
Safety decals and instructions are easily visible to the operator and are located near any
area of potential danger. Replace any decal that is damaged or lost.
BY FRONT HEIGHT ADJUSTER
(Part No. 92–2914 Right)
(Part No. 92–2915 Left)
ON MOWER HOUSING
(Part No. 93–7250)
ON TOP OF GRASS CATCHER CHUTE
(Part No. 92–2919)
(Models 10324 and 10332)
ON MOWER HOUSING
(Part No. 43–8480)
ON MOWER HOUSING
(Part No. 99–6018)